
Ang 10-inch 16K mono LCD ay naglalagay ng 14 × 19 µm pixels sa ilalim ng iyong modelo, kaya ang texture ng balat, chain mail at pinong letra ay lumalabas na malinaw sa halip na may hagdan. Pinapanatili itong mabilis ng tilt release, pinapanatili ng heated tank ang resin na maayos, at ang auto-levelling ay nangangahulugang maaari kang mag-print ilang minuto pagkatapos ng pag-unbox.
Ang metal tank ay nagpapainit at nagpapanatili ng resin sa 30 °C. Bumaba ang viscosity, bawat layer ay maayos na dumidikit sa huli, at ang mga pagkabigo na nagmumula sa malamig na resin sa isang malamig na umaga ay halos nawawala.
Ang tilt release ay nagbabalat ng bawat layer sa isang anggulo sa halip na hilahin ito nang tuwid pataas, kaya nananatiling mababa ang suction forces. Nagbibigay-daan iyon sa printer na tumakbo nang husto habang pinapanatili ang manipis na dingding at pinong pin na buo.
Ang na-upgrade na camera ay may sariling ilaw, kaya ang pagsubaybay ay hindi nakasalalay sa ilaw ng silid. Binabantayan nito ang walang laman na build plate at ang pagbaluktot, at ang time-lapse output ay handa nang ibahagi.
Awtomatikong humihinto ang pag-print kung ang temperatura ng LED ay lumampas sa 80 °C, ang power-loss recovery ay nagpapatuloy kung saan huminto ang trabaho, at ang isang one-tap self-test ay sumusuri sa makina bago mo ilaan ang resin sa isang mahabang print.
Quick-release non-slip build plate, isang resin tank na may dual pour spouts, isang drip tray, replaceable lock screws, isang laser-engraved plate surface para sa adhesion nang walang drama, PFA release film, at isang 9H tempered-glass LCD protector.
Sinusuportahan ng built-in na dual-band Wi-Fi ang cluster printing sa ilang makina. Ang EL3D-4.0 system ay tumatanggap ng mga OTA update, nagsasalita ng 12 wika, at nag-aalok ng section-based exposure upang maaari mong i-tune ang exposure ayon sa taas sa halip na magkasya sa isang compromise value. Mag-slice sa ELEGOO SatelLite o Chitubox.
Ang Elegoo Saturn 4 Ultra 16K 3D Printer ay ฿17,000 kasama ang VAT sa Print My Design. May stock ito; makikita sa pahinang ito ang stock sa bawat branch. Libre ang delivery saanman sa Thailand.
211.68 × 118.37 × 220 mm, with a 10-inch 16K mono LCD (15,120 × 6,230 pixels), 14 × 19 µm XY resolution and 0.01–0.2 mm layers.
The 16K panel has 15,120 × 6,230 pixels at 14 × 19 µm, against 19 × 24 µm on the 12K. It adds the 30 °C smart heating tank, the new AI camera with a chamber light, and built-in Wi-Fi instead of an external antenna. The build volume is slightly smaller: 211.68 × 118.37 × 220 mm against 218.88 × 122.88 × 220 mm.
Up to 150 mm/h with tilt release, or about 5.5 s per layer in fast mode with Chitubox defaults (2.5 s exposure). Elegoo rates it twice as fast as the Saturn 3 Ultra, and you can switch between fast and slow modes.
405 nm UV resins for LCD printers. Elegoo publishes starting settings for this model across its own Standard, ABS-Like, Water Washable, 8K, Plant-based, Tough and Dental resins. For other brands, run an exposure test first.
Yes. Prints come off the plate coated in uncured resin. Wash them in IPA, or water for water-washable resin, let them dry, then UV-cure them. The ELEGOO Mercury 3.0 Plus Wash and Cure does both steps in one machine.
Yes. It levels itself, runs a self-test, heats the resin automatically, and its camera and sensors warn about an empty plate, a warped model or low resin. Beginners still need to learn supports, safe resin handling, and washing and curing.
Choose the Saturn 4 Ultra 16K for detail and speed: 14 × 19 µm and up to 150 mm/h. Choose the Jupiter 2 16K for big parts: 302 × 162 × 300 mm, 20 × 26 µm and automatic resin feeding. The Jupiter SE uses a 6K screen (51 µm) with a 277.848 × 156.264 × 300 mm build volume.
Yes. Print My Design (Septillion Co., Ltd.) is an official distributor of Elegoo in Thailand. Printers carry a Thai warranty, with after-sales support from our Thai team.
Yes. Companies can request a full tax invoice by giving the company name, address and tax ID when ordering.
Order online on this page, or buy through our True Digital Park, Seacon Bangkae or Central Sriracha branch.