Print My Design
This product is on promotion:Anycubic Kobra S1 + ACE — ราคาเคลียร์สต็อก ฿17,900 รวม VATSee details →
홈/쇼핑/Anycubic/Anycubic Kobra S1 3D Printer
ANYCUBIC · Anycubic 3D Printer

Anycubic Kobra S1 3D Printer

🎁 PROMO
Anycubic태국 Anycubic 공식 대리점
Anycubic Anycubic Kobra S1 3D Printer
Anycubic logo
฿ 17,900฿ 18,500−3%VAT 포함

주요 사양

Anycubic Kobra S1 3D Printers
🎁 PROMO
🎁 Free gifts with this promotion
until 31 Dec 2026
Includes 1 free เครื่อง
Anycubic ACE For Kobra S1
Gifts are added to the cart as ฿0 lines with the main product · subject to stock.
1
🏬 Availability
Online warehouse · ships nationwide✓ Ready to ship
True Digital ParkOut of stock
Seacon BangkaeOut of stock
Central Sriracha✓ In store
  • 🚚 태국 전역 무료 배송 또는 지점 픽업
  • ↩ 미사용 시 7일 이내 반품 가능 · 조건 보기
250³mm
출력 영역
600mm/s
최고 속도
320°C
최고 노즐 온도
9
지원 소재

Anycubic Kobra S1 — Simple, One and Done. 속도와 안정성을 위해 제작된 완전 밀폐형 CoreXY FDM 3D 프린터: 최대 600 mm/s 인쇄 속도, 최대 320 ℃의 올메탈 핫엔드, LeviQ 3.0 완전 자동 레벨링, ACE Pro 시스템과 페어링 시 스마트 멀티컬러 인쇄가 가능합니다.

Kobra S1를 선택하는 이유

  • CoreXY 구조 — 고속에서도 안정적이고 정밀함
  • 최대 600 mm/s의 인쇄 속도
  • 최대 320 ℃의 올메탈 핫엔드; 최대 120 ℃의 히팅 베드
  • 노즐 변형 센서가 있는 LeviQ 3.0 완전 자동 레벨링
  • 완전 밀폐형 — ABS, ASA 및 엔지니어링 필라멘트에 이상적
  • ACE Pro (콤보)를 통한 스마트 4–8색 인쇄

빠르고 안정적인 CoreXY

CoreXY 구조는 인쇄 중에도 견고하고 정밀한 구조를 유지하여 최대 600 mm/s의 고속에서도 안정성을 유지하여 빠르고 깨끗한 결과를 제공합니다.

고온 올메탈 핫엔드

최대 320 ℃에 도달하는 올메탈 핫엔드와 최대 120 ℃의 히팅 플레이트가 완전 밀폐형 챔버 내부에 있어 Kobra S1은 PLA 및 PETG 외에도 ABS, ASA, PA, PC 및 기타 엔지니어링 등급 필라멘트를 처리할 수 있습니다.

LeviQ 3.0 자동 레벨링

노즐에 변형 센서가 있는 LeviQ 3.0 완전 자동 레벨링은 수동 조작 없이도 탁월하고 일관된 첫 번째 레이어를 제공합니다.

스마트 멀티컬러 (ACE Pro)

Anycubic ACE Pro 패키지(Kobra S1 콤보에 포함)와 페어링하면 프린터는 필라멘트 건조 및 지능형 공급과 함께 4~8가지 색상으로 스마트 멀티컬러 인쇄를 가능하게 합니다.

사양

인쇄 기술FDM (밀폐형 CoreXY)빌드 볼륨250 × 250 × 250 mm
인쇄 속도최대 600 mm/s핫엔드올메탈, ≤ 320 ℃
히팅 베드≤ 120 ℃레벨링LeviQ 3.0 완전 자동
압출기다이렉트 드라이브멀티컬러ACE Pro로 4–8색
필라멘트 호환성PLA / PETG / ABS / ASA / TPU / PA / PC연결성USB / WiFi / App

구성품

Kobra S1 3D 프린터 · 빌드 플레이트 · 노즐 키트 · 툴 키트 · 전원 케이블 · 사용자 설명서. (Kobra S1 콤보에는 ACE Pro 멀티컬러 시스템이 추가됩니다.)

지원 소재

PLAPETGABSASATPU 95APCPAเส้นผสมคาร์บอนกลาสไฟเบอร์
자주 묻는 질문 · FAQ

자주 묻는 질문

Anycubic Kobra S1 3D Printer 가격은 얼마인가요?+

Print My Design에서 Anycubic Kobra S1 3D Printer의 가격은 ฿17,900(VAT 포함)입니다 (정상가 ฿18,500). 재고가 있으며 매장별 재고는 이 페이지에서 확인할 수 있습니다. 태국 전역 무료 배송입니다.

How big and how fast can the Anycubic Kobra S1 print?+

The build volume is 250 × 250 × 250 mm. Recommended speed is 300 mm/s, maximum 600 mm/s, with up to 20,000 mm/s² acceleration. Anycubic quotes about 13 minutes for a Benchy at 0.2 mm layers.

Is the Kobra S1 enclosed, and which filaments does it print?+

Yes, it is fully enclosed, with a PC front door and top cover. It prints PLA, PETG, ABS, ASA and TPU 95A, plus PC, PA and carbon- or glass-fibre filled filaments. The nozzle reaches 320 °C and the bed 120 °C.

Can the Kobra S1 print in multiple colours, and how many?+

It prints one colour out of the box. One ACE Pro gives 4 colours. Anycubic states the Kobra S1 supports up to two ACE Pro units for up to 8 colours; eight colours also need the 8 Colors Filament Hub.

Can I buy the Kobra S1 now and add the ACE Pro later?+

Yes. The Kobra S1 accepts an ACE Pro later, and Print My Design sells the ACE for Kobra S1 separately. If you want colour from day one, the Kobra S1 Combo includes the ACE Pro.

Is the Kobra S1 good for beginners?+

Yes. After unboxing, you unlock the print head and bed as the manual shows. The on-screen setup connects Wi-Fi and the app, then runs a self-check, vibration compensation and LeviQ 3.0 auto-levelling. AI failure detection, runout detection and power-loss resume help during prints.

What is the difference between the Kobra S1 and the Kobra S1 Combo?+

The printer is identical. The Kobra S1 Combo adds a 4-slot ACE Pro, giving 4-colour printing, drying up to 55 °C and automatic backup-spool refill. The Kobra S1 prints one colour from its spool holder.

Can the Kobra S1 print TPU?+

Yes, if the TPU is 95A or harder. Feed it from the spool holder in single-colour mode and slow the print down. Never feed TPU through the ACE Pro. Anycubic says TPU of 85A or softer does not work on the Kobra S1.

Is Print My Design an official Anycubic distributor?+

Yes. Print My Design is run by Septillion Co., Ltd., an official distributor of Anycubic in Thailand. Printers come with a Thai warranty and after-sales support from our Thai team.

Can my company get a full tax invoice?+

Yes. We issue full tax invoices to companies. Enter the company name and tax ID at checkout, or tell our staff at the branch.

Where can I buy the Anycubic Kobra S1?+

Order online on this page, or buy at our True Digital Park, Seacon Bangkae and Central Sriracha branches.

다음 상품도 고려해 보세요

비교해 볼 만한 다른 선택지

모두 보기 →
소재

FDM 프린터용 필라멘트

전체 보기 →
유사 제품

3D 프린터

전체 보기 →