
10인치 16K 모노 LCD는 모델 아래에 14 × 19 µm 픽셀을 배치하여 피부 질감, 체인 메일 및 미세한 글자가 계단 현상 없이 선명하게 나옵니다. 틸트 릴리스는 인쇄 속도를 빠르게 유지하고, 가열된 레진 탱크는 레진을 잘 유지하며, 자동 레벨링은 개봉 후 몇 분 안에 인쇄를 시작할 수 있음을 의미합니다.
금속 탱크는 레진을 30 °C로 가열하고 유지합니다. 점도가 떨어지고 각 레이어가 이전 레이어에 제대로 젖어들며, 차가운 아침에 차가운 레진으로 인해 발생하는 실패가 대부분 사라집니다.
틸트 릴리스는 각 레이어를 똑바로 위로 당기는 대신 각도로 벗겨내어 흡입력을 낮게 유지합니다. 이를 통해 프린터가 얇은 벽과 미세한 핀을 손상시키지 않고 빠르게 작동할 수 있습니다.
업그레이드된 카메라에는 자체 조명이 있어 모니터링이 실내 조명에 의존하지 않습니다. 빈 빌드 플레이트와 휘어짐을 감시하며, 타임랩스 결과물은 공유할 준비가 되어 있습니다.
LED 온도가 80 °C를 초과하면 인쇄가 자동으로 일시 중지되고, 전원 손실 복구는 작업이 중단된 지점부터 다시 시작하며, 한 번의 탭으로 자체 테스트를 통해 긴 인쇄에 레진을 사용하기 전에 기계를 확인합니다.
퀵 릴리스 미끄럼 방지 빌드 플레이트, 이중 주입구가 있는 레진 탱크, 드립 트레이, 교체 가능한 잠금 나사, 문제 없는 접착을 위한 레이저 각인 플레이트 표면, PFA 이형 필름, 9H 강화 유리 LCD 보호대.
내장된 듀얼 밴드 Wi-Fi는 여러 기기에서 클러스터 인쇄를 지원합니다. EL3D-4.0 시스템은 OTA 업데이트를 지원하고, 12개 언어를 지원하며, 단일 타협 값에 만족하는 대신 높이별로 노출을 조정할 수 있는 섹션 기반 노출을 제공합니다. ELEGOO SatelLite 또는 Chitubox에서 슬라이싱하세요.
Print My Design에서 Elegoo Saturn 4 Ultra 16K 3D Printer의 가격은 ฿17,000(VAT 포함)입니다. 재고가 있으며 매장별 재고는 이 페이지에서 확인할 수 있습니다. 태국 전역 무료 배송입니다.
211.68 × 118.37 × 220 mm, with a 10-inch 16K mono LCD (15,120 × 6,230 pixels), 14 × 19 µm XY resolution and 0.01–0.2 mm layers.
The 16K panel has 15,120 × 6,230 pixels at 14 × 19 µm, against 19 × 24 µm on the 12K. It adds the 30 °C smart heating tank, the new AI camera with a chamber light, and built-in Wi-Fi instead of an external antenna. The build volume is slightly smaller: 211.68 × 118.37 × 220 mm against 218.88 × 122.88 × 220 mm.
Up to 150 mm/h with tilt release, or about 5.5 s per layer in fast mode with Chitubox defaults (2.5 s exposure). Elegoo rates it twice as fast as the Saturn 3 Ultra, and you can switch between fast and slow modes.
405 nm UV resins for LCD printers. Elegoo publishes starting settings for this model across its own Standard, ABS-Like, Water Washable, 8K, Plant-based, Tough and Dental resins. For other brands, run an exposure test first.
Yes. Prints come off the plate coated in uncured resin. Wash them in IPA, or water for water-washable resin, let them dry, then UV-cure them. The ELEGOO Mercury 3.0 Plus Wash and Cure does both steps in one machine.
Yes. It levels itself, runs a self-test, heats the resin automatically, and its camera and sensors warn about an empty plate, a warped model or low resin. Beginners still need to learn supports, safe resin handling, and washing and curing.
Choose the Saturn 4 Ultra 16K for detail and speed: 14 × 19 µm and up to 150 mm/h. Choose the Jupiter 2 16K for big parts: 302 × 162 × 300 mm, 20 × 26 µm and automatic resin feeding. The Jupiter SE uses a 6K screen (51 µm) with a 277.848 × 156.264 × 300 mm build volume.
Yes. Print My Design (Septillion Co., Ltd.) is an official distributor of Elegoo in Thailand. Printers carry a Thai warranty, with after-sales support from our Thai team.
Yes. Companies can request a full tax invoice by giving the company name, address and tax ID when ordering.
Order online on this page, or buy through our True Digital Park, Seacon Bangkae or Central Sriracha branch.