
Anycubic Kobra S1 — シンプル、これ一台で完結。 速度と信頼性のために構築された完全密閉型CoreXY FDM 3Dプリンター:最大600 mm/sの印刷速度、320 ℃までのオールメタルホットエンド、LeviQ 3.0完全自動レベリング、およびACE Proシステムと組み合わせたスマートマルチカラー印刷。
CoreXY構造により、印刷中に構造が堅牢かつ高精度に保たれ、最大600 mm/sの高速でも安定性を維持し、高速でクリーンな結果をもたらします。
320 ℃に達するオールメタルホットエンドと120 ℃までの加熱プレートが完全密閉チャンバー内にあり、Kobra S1はPLAやPETGに加えて、ABS、ASA、PA、PC、その他のエンジニアリンググレードのフィラメントを扱うことができます。
ノズル内のひずみセンサーを備えたLeviQ 3.0完全自動レベリングは、手動での手間をかけずに、優れた一貫した最初の層を実現します。
Anycubic ACE Proパッケージ(Kobra S1 Comboに付属)と組み合わせることで、プリンターは4〜8色のスマートマルチカラー印刷を可能にし、フィラメント乾燥とインテリジェントな供給を備えています。
| 印刷技術 | FDM (密閉型CoreXY) | ビルドボリューム | 250 × 250 × 250 mm |
|---|---|---|---|
| 印刷速度 | 最大600 mm/s | ホットエンド | オールメタル、≤ 320 ℃ |
| 加熱ベッド | ≤ 120 ℃ | レベリング | LeviQ 3.0完全自動 |
| エクストルーダー | ダイレクトドライブ | マルチカラー | ACE Proで4〜8色 |
| フィラメント互換性 | PLA / PETG / ABS / ASA / TPU / PA / PC | 接続性 | USB / WiFi / App |
Kobra S1 3Dプリンター · ビルドプレート · ノズルキット · ツールキット · 電源ケーブル · ユーザーマニュアル。(Kobra S1 ComboにはACE Proマルチカラーシステムが追加されます。)
Print My Design でのAnycubic Kobra S1 3D Printerの価格は ฿17,900(VAT込み)です(通常価格 ฿18,500)。在庫があります。店舗ごとの在庫はこのページでご確認いただけます。タイ国内は送料無料です。
The build volume is 250 × 250 × 250 mm. Recommended speed is 300 mm/s, maximum 600 mm/s, with up to 20,000 mm/s² acceleration. Anycubic quotes about 13 minutes for a Benchy at 0.2 mm layers.
Yes, it is fully enclosed, with a PC front door and top cover. It prints PLA, PETG, ABS, ASA and TPU 95A, plus PC, PA and carbon- or glass-fibre filled filaments. The nozzle reaches 320 °C and the bed 120 °C.
It prints one colour out of the box. One ACE Pro gives 4 colours. Anycubic states the Kobra S1 supports up to two ACE Pro units for up to 8 colours; eight colours also need the 8 Colors Filament Hub.
Yes. The Kobra S1 accepts an ACE Pro later, and Print My Design sells the ACE for Kobra S1 separately. If you want colour from day one, the Kobra S1 Combo includes the ACE Pro.
Yes. After unboxing, you unlock the print head and bed as the manual shows. The on-screen setup connects Wi-Fi and the app, then runs a self-check, vibration compensation and LeviQ 3.0 auto-levelling. AI failure detection, runout detection and power-loss resume help during prints.
The printer is identical. The Kobra S1 Combo adds a 4-slot ACE Pro, giving 4-colour printing, drying up to 55 °C and automatic backup-spool refill. The Kobra S1 prints one colour from its spool holder.
Yes, if the TPU is 95A or harder. Feed it from the spool holder in single-colour mode and slow the print down. Never feed TPU through the ACE Pro. Anycubic says TPU of 85A or softer does not work on the Kobra S1.
Yes. Print My Design is run by Septillion Co., Ltd., an official distributor of Anycubic in Thailand. Printers come with a Thai warranty and after-sales support from our Thai team.
Yes. We issue full tax invoices to companies. Enter the company name and tax ID at checkout, or tell our staff at the branch.
Order online on this page, or buy at our True Digital Park, Seacon Bangkae and Central Sriracha branches.