The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and an advanced motion control system that prints a 14-minute Benchy with quality, following all the speed-Benchy rules straight out of the box without specialized filaments.
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
| Build Volume (W×D×H) | 180 × 180 × 180 mm³ |
| Hot End | All-Metal |
| Nozzle | Stainless Steel — 0.4 mm (Included); 0.2 / 0.6 / 0.8 mm (Optional) |
| Max Hot End Temperature | 300 °C |
| Build Plate | Bambu Textured PEI Plate (Included); Bambu Smooth PEI Plate |
| Max Build Plate Temperature | 80 °C |
| Max Speed of Tool Head | 500 mm/s |
| Max Acceleration of Tool Head | 10000 mm/s² |
| Supported Filament | Ideal: PLA, PETG, TPU, PVA; ABS, ASA, PC, PA, PET. Carbon/Glass Fiber Reinforced Polymer Not Recommended |
| Monitoring Camera | Low Framerate Camera (up to 1080P); Timelapse Supported |
| Filament Run-out / Tangle / Odometry | Yes |
| Power Loss Recovery | Yes |
| Physical Dimensions | A1 mini: 347 × 315 × 365 mm³, Net weight 5.5 kg, Gross weight 8.2 kg A1 mini Combo: Gross weight (AMS lite included) 10.2 kg |
A1 mini Combo Add-ons
1. What's the difference between AMS and AMS lite?
AMS is enclosed and the AMS lite is non-enclosed. AMS is incompatible with the A1 mini — for multi-colour printing on the A1 mini you must use the AMS lite. AMS lite is incompatible with the X1 or P1 printers.
2. What materials can the A1 mini print?
The A1 mini can print most materials that don't require an enclosure, such as PLA, PETG, TPU and their support filaments. Filaments such as ABS, ASA, PC, PA and PET that require higher bed and chamber temperatures are not recommended.
3. What is the maximum print size of the A1 mini?
180 × 180 × 180 mm.
