Elegoo PLA Filament 1.75mm 1kg

What PLA is

PLA is the easiest filament to print: low shrinkage, no hot bed or enclosure required, crisp surfaces, vivid colours and almost no smell. It is the starting material for most users and for display pieces.

Typical ranges for this material; the spool label and the printer profile are the authority.

What it is good for

Good for models, figures, prototypes, decor and any part that stays cool. Its limits: it softens around 55–60 °C, so it is wrong for parts in a parked car or near heat, and it is more brittle than PETG under impact.

Which printer

Prints on open-frame machines such as the Bambu Lab A1 mini / A1 and Creality SPARKX i7

Storage and care

Store in a zip bag with desiccant. If the filament snaps easily or pops while printing, dry it at about 45–50 °C for two to four hours.