Formlabs Flexible 80A Resin (Form 4) 1 L SKU: RS-C2-FL80-11
Formlabs Flexible 80A Resin (Form 4) 1 L
SKU: RS-C2-FL80-11
TPU is a rubber-like flexible filament; its hardness is given as a Shore value such as 95A, and the lower the number the softer it is. Printed parts squeeze, bend and spring back, and resist wear and oil.
| Nozzle temperature | 210–230 °C |
|---|---|
| Bed temperature | 30–60 °C |
| Enclosure | Not needed |
| Drying | 50–60 °C for 4–6 h before printing |
Typical ranges for this material; the spool label and the printer profile are the authority.
Good for protective cases, seals and gaskets, wheels, anti-slip feet, straps and anything that must flex.
Prints on most direct-drive machines at reduced speed; soft grades are usually fed from an external spool rather than through an automatic material changer. Check the printer manual for the exact rule.
TPU absorbs moisture very quickly. Dry it before every print if it bubbles or strings, and keep retraction to a minimum.
