PLA Basic · 4 colours · 1.75 mm · 1 kg · 1.24 g/cm³
Print My Design PLA Basic Filament 1.75 mm 1 kg, available in 4 colours (Skin Color, Brown, Light Gray, Blue) on 1 kg spools ฿485 inc VAT. Pick a colour above — stock ships from our warehouse in Thailand.
PLA is the easiest filament to print — low odour, very little warping, and it sticks to the bed without an enclosure. Good for prototypes, models, figures, decorative pieces and teaching, where the same file has to print the same way every time.
PLA softens in sustained heat, so finished parts should not be left in a parked car. For heat resistance move up to PETG or ABS.
Choosing between the three: PLA is the easiest and holds dimensions best. Move to PETG when the part has to take load or sit in the sun, and to ABS when it meets real heat or impact.
A 1 kg spool at 1.24 g/cm³ works out at roughly 335 m of filament, about ฿0.485 of material per gram — enough to cost a part before you print it.
Dark colours such as black and navy hide layer lines best, so parts look finished without sanding. White and pale shades make the best base for painting. Saturated colours — red, orange, yellow — suit parts that must stand out or separate one batch from another. If a single build needs more than one spool, order them together: shade can shift slightly between production batches.
We print with this same PLA every day in our own 3D printing service — mostly prototypes, presentation models and short runs from customer files — so we see how each batch behaves long before it reaches the shelf.
4 colours are in stock right now: Skin Color, Brown, Light Gray, Blue. Pick one above — anything out of stock is shown as such.
About 335 m on the 1 kg spool, from its net weight, 1.24 g/cm³ density and 1.75 mm diameter.
Any FDM printer that takes 1.75 mm filament.
It depends on your printer and print speed. Start from your printer maker’s recommendation for this material and adjust in 5 °C steps until surface finish and layer adhesion are both good.
Yes — and if one build needs more than one spool, order them together, because shade can shift slightly between production batches.
Yes, at True Digital Park, Seacon Bangkae or Central Sriracha, or we deliver nationwide.
PLA is the easiest filament to print: low shrinkage, no hot bed or enclosure required, crisp surfaces, vivid colours and almost no smell. It is the starting material for most users and for display pieces.
| Nozzle temperature | 190–220 °C |
|---|---|
| Bed temperature | 50–60 °C |
| Enclosure | Not needed |
| Drying | Rarely; store sealed |
Typical ranges for this material; the spool label and the printer profile are the authority.
Good for models, figures, prototypes, decor and any part that stays cool. Its limits: it softens around 55–60 °C, so it is wrong for parts in a parked car or near heat, and it is more brittle than PETG under impact.
Prints on open-frame machines such as the Bambu Lab A1 mini / A1 and Creality SPARKX i7
Store in a zip bag with desiccant. If the filament snaps easily or pops while printing, dry it at about 45–50 °C for two to four hours.
