
Anycubic Kobra S1 — Simple, One and Done. Isang ganap na nakasarang CoreXY FDM 3D printer na binuo para sa bilis at pagiging maaasahan: hanggang 600 mm/s na pag-print, isang all-metal hotend hanggang 320 ℃, LeviQ 3.0 na ganap na awtomatikong pagle-level, at matalinong multicolor na pag-print kapag ipinares sa ACE Pro system.
Pinapanatili ng CoreXY na konstruksyon ang istraktura na matibay at tumpak sa panahon ng pag-print, pinapanatili ang katatagan kahit sa matataas na bilis hanggang 600 mm/s para sa mabilis at malinis na resulta.
Ang isang all-metal hotend na umaabot sa 320 ℃ at isang heated plate hanggang 120 ℃, sa loob ng isang ganap na nakasarang silid, ay nagpapahintulot sa Kobra S1 na humawak ng ABS, ASA, PA, PC at iba pang engineering-grade filaments bilang karagdagan sa PLA at PETG.
Ang LeviQ 3.0 na ganap na awtomatikong pagle-level na may strain sensors sa nozzle ay naghahatid ng mahusay at pare-parehong unang layer nang walang manu-manong abala.
Kapag ipinares sa Anycubic ACE Pro package (kasama sa Kobra S1 Combo), ang printer ay nagbibigay-daan sa matalinong multicolor na pag-print sa 4 hanggang 8 kulay, na may filament drying at intelligent feeding.
| Teknolohiya ng Pag-print | FDM (nakasarang CoreXY) | Laki ng Pagbuo | 250 × 250 × 250 mm |
|---|---|---|---|
| Bilis ng Pag-print | Hanggang 600 mm/s | Hotend | All-metal, ≤ 320 ℃ |
| Heated Bed | ≤ 120 ℃ | Pagle-level | LeviQ 3.0 ganap na awtomatiko |
| Extruder | Direct drive | Multicolor | 4–8 kulay gamit ang ACE Pro |
| Pagkakatugma ng Filament | PLA / PETG / ABS / ASA / TPU / PA / PC | Konektibidad | USB / WiFi / App |
Kobra S1 3D Printer · Build plate · Nozzle kit · Tool kit · Power cable · User manual. (Ang Kobra S1 Combo ay nagdaragdag ng ACE Pro multicolor system.)
Ang Anycubic Kobra S1 3D Printer ay ฿17,900 kasama ang VAT sa Print My Design (regular na presyo ฿18,500). May stock ito; makikita sa pahinang ito ang stock sa bawat branch. Libre ang delivery saanman sa Thailand.
The build volume is 250 × 250 × 250 mm. Recommended speed is 300 mm/s, maximum 600 mm/s, with up to 20,000 mm/s² acceleration. Anycubic quotes about 13 minutes for a Benchy at 0.2 mm layers.
Yes, it is fully enclosed, with a PC front door and top cover. It prints PLA, PETG, ABS, ASA and TPU 95A, plus PC, PA and carbon- or glass-fibre filled filaments. The nozzle reaches 320 °C and the bed 120 °C.
It prints one colour out of the box. One ACE Pro gives 4 colours. Anycubic states the Kobra S1 supports up to two ACE Pro units for up to 8 colours; eight colours also need the 8 Colors Filament Hub.
Yes. The Kobra S1 accepts an ACE Pro later, and Print My Design sells the ACE for Kobra S1 separately. If you want colour from day one, the Kobra S1 Combo includes the ACE Pro.
Yes. After unboxing, you unlock the print head and bed as the manual shows. The on-screen setup connects Wi-Fi and the app, then runs a self-check, vibration compensation and LeviQ 3.0 auto-levelling. AI failure detection, runout detection and power-loss resume help during prints.
The printer is identical. The Kobra S1 Combo adds a 4-slot ACE Pro, giving 4-colour printing, drying up to 55 °C and automatic backup-spool refill. The Kobra S1 prints one colour from its spool holder.
Yes, if the TPU is 95A or harder. Feed it from the spool holder in single-colour mode and slow the print down. Never feed TPU through the ACE Pro. Anycubic says TPU of 85A or softer does not work on the Kobra S1.
Yes. Print My Design is run by Septillion Co., Ltd., an official distributor of Anycubic in Thailand. Printers come with a Thai warranty and after-sales support from our Thai team.
Yes. We issue full tax invoices to companies. Enter the company name and tax ID at checkout, or tell our staff at the branch.
Order online on this page, or buy at our True Digital Park, Seacon Bangkae and Central Sriracha branches.