Opisyal na distributor ng Anycubic sa ThailandAnycubic Kobra S1 Combo — isang abot-kayang, ganap na nakasarang CoreXY multicolor 3D printer na ipinapares ang Kobra S1 sa ANYCUBIC Color Engine Pro (ACE Pro) para sa madaling 4- o 8-kulay na pag-print, aktibong pagpapatuyo, at mabilis na resulta.
Ang kasamang ACE Pro system ay gumagawa ng nakamamanghang multicolor na mga print na may anti-entanglement feeding at awtomatikong pag-refill ng filament. Magdagdag ng pangalawang ACE Pro upang umabot sa 8 kulay. Pinapatuyo rin nito ang filament nang aktibo habang nagpi-print (hanggang 55 °C) para sa pare-parehong kalidad.
Ang isang matibay, ganap na nakasarang CoreXY frame ay naghahatid ng inirerekomendang 300 mm/s at hanggang 600 mm/s, na may acceleration na hanggang 20,000 mm/s². Maaari itong makumpleto ang isang Benchy sa loob ng humigit-kumulang 15 minuto.
Ang tool-free, anti-clogging 320 °C hotend ay gumagamit ng aerospace-grade ceramic composite throat para sa mataas na heat resistance at mababang friction. Ito ay kasama ng isang 0.4 mm nozzle at sumusuporta sa 0.2 / 0.6 / 0.8 mm.
Ang LeviQ 3.0 auto-leveling na may Z-offset, resonance compensation at dynamic flow compensation ay nagpapanatili ng tumpak na mga print. Ang AI spaghetti detection (sa pamamagitan ng built-in na HD camera), belt-tension monitoring, power-loss resume at filament runout detection ay nagdaragdag ng kapayapaan ng isip — lahat sa 44 dB lamang sa Quiet mode.
Mag-print ng PLA, PETG, TPU 95A, ABS at ASA, kasama ang mga high-temperature na materyales tulad ng PC, PA at carbon/glass-fiber composites. (Ang TPU 95A ay single-color lamang at hindi ipinapakain sa ACE Pro.)
| Teknolohiya sa Pag-print | FDM (Fused Deposition Modeling) |
| Multicolor | 4- o 8-kulay sa pamamagitan ng ACE Pro |
| Laki ng Pagbuo | 250 × 250 × 250 mm |
| Konstruksyon | Ganap na nakasarang CoreXY |
| Bilis ng Pag-print | 300 mm/s (inirerekomenda) · hanggang 600 mm/s |
| Acceleration | 10,000 mm/s² (inirerekomenda) · hanggang 20,000 mm/s² |
| Nozzle | 0.4 mm standard (0.6 / 0.8 mm suportado) |
| Max Nozzle Temp | 320 °C |
| Build Plate | PEI-coated spring steel |
| Max Bed Temp | 120 °C |
| Taas ng Layer | 0.05–0.28 mm |
| Extruder | Short-distance (direct) extrusion |
| Leveling | LeviQ 3.0 auto-leveling + Z-offset |
| Pagpapatuyo ng Filament | Aktibo, hanggang 55 °C |
| Camera | HD (480p) · AI spaghetti detection |
| Touchscreen | 4.3-inch capacitive |
| Konektibidad | Wi-Fi · Anycubic App · USB |
| Firmware / Slicer | Kobra OS / Anycubic Slicer Next |
| Ingay | ≤46 dB (standard) · ≤44 dB (tahimik) |
| Timbang ng Makina | Kobra S1 18 kg + ACE Pro 4.6 kg |
| Laki ng Makina | 400 × 410 × 490 mm |
Kobra S1 Printer · ANYCUBIC Color Engine Pro (ACE Pro) · Spool Holder · Signal Cable · Filament Tubes · Nozzle Cleaner · Anti-blocking Module · Filament Sample · USB Drive · Power Cords · Activated Carbon · mga tool at ekstrang bahagi.
Ang Anycubic Kobra S1 Combo 3D Printer ay ฿23,000 kasama ang VAT sa Print My Design. May stock ito; makikita sa pahinang ito ang stock sa bawat branch. Libre ang delivery saanman sa Thailand.
It prints 4 colours with the included ACE Pro. Anycubic states the Kobra S1 supports up to two ACE Pro units, so up to 8 colours; eight colours also need the 8 Colors Filament Hub.
The build volume is 250 × 250 × 250 mm. Recommended speed is 300 mm/s, maximum 600 mm/s, with up to 20,000 mm/s² acceleration. Anycubic quotes about 13 minutes for a Benchy at 0.2 mm layers.
Yes, it is a fully enclosed CoreXY printer. It prints PLA, PETG, ABS, ASA, TPU 95A, PC, PA and carbon- or glass-fibre filaments. Colour work through the ACE Pro uses PLA, PETG, ABS, ASA, PA and PC; TPU and fibre filaments print single-colour from the spool holder.
Yes. The ACE Pro dries filament at up to 55 °C, before or during a print; drying during a print can run up to 24 hours. That keeps moisture-sensitive filament ready to print.
Yes. The Kobra S1 has a single nozzle, so each colour change flushes the old colour out. You can tune flushing in Anycubic Slicer Next, and fewer colour changes mean less waste.
Yes. Setup guides you through Wi-Fi, the app and LeviQ 3.0 auto-levelling. The ACE Pro loads filament itself and reads chipped Anycubic spools. AI failure detection, runout detection and power-loss resume help, at 44 dB or less in quiet mode.
The printer and its specs are identical. The Combo adds the ACE Pro for 4-colour printing, drying and automatic refill. The Kobra S1 prints one colour but can take an ACE later.
Yes. Print My Design is run by Septillion Co., Ltd., an official distributor of Anycubic in Thailand. Products come with a Thai warranty and after-sales support from our Thai team.
Yes. We issue full tax invoices to companies. Enter the company name and tax ID at checkout, or tell our staff at the branch.
Order online on this page, or buy at our True Digital Park, Seacon Bangkae and Central Sriracha branches.
