
Anycubic Kobra S1 — Simple, One and Done. Printer 3D FDM CoreXY yang tertutup sepenuhnya, dibuat untuk kecepatan dan keandalan: pencetakan hingga 600 mm/s, hotend all-metal hingga 320 ℃, perataan otomatis penuh LeviQ 3.0, dan pencetakan multiwarna cerdas saat dipasangkan dengan sistem ACE Pro.
Konstruksi CoreXY menjaga struktur tetap kokoh dan presisi selama pencetakan, mempertahankan stabilitas bahkan pada kecepatan tinggi hingga 600 mm/s untuk hasil yang cepat dan bersih.
Hotend all-metal yang mencapai 320 ℃ dan heated plate hingga 120 ℃, di dalam ruang tertutup sepenuhnya, memungkinkan Kobra S1 menangani ABS, ASA, PA, PC, dan filamen kelas rekayasa lainnya selain PLA dan PETG.
Perataan otomatis penuh LeviQ 3.0 dengan sensor regangan di nozzle menghasilkan lapisan pertama yang sangat baik dan konsisten tanpa kerumitan manual.
Dipasangkan dengan paket Anycubic ACE Pro (termasuk dalam Kobra S1 Combo), printer ini memungkinkan pencetakan multiwarna cerdas dalam 4 hingga 8 warna, dengan pengeringan filamen dan pengumpanan cerdas.
| Teknologi Pencetakan | FDM (CoreXY tertutup) | Volume Cetak | 250 × 250 × 250 mm |
|---|---|---|---|
| Kecepatan Cetak | Hingga 600 mm/s | Hotend | All-metal, ≤ 320 ℃ |
| Heated Bed | ≤ 120 ℃ | Perataan | LeviQ 3.0 otomatis penuh |
| Ekstruder | Direct drive | Multiwarna | 4–8 warna dengan ACE Pro |
| Kompatibilitas Filamen | PLA / PETG / ABS / ASA / TPU / PA / PC | Konektivitas | USB / WiFi / Aplikasi |
Printer 3D Kobra S1 · Build plate · Kit nozzle · Kit alat · Kabel daya · Panduan pengguna. (Kobra S1 Combo menambahkan sistem multiwarna ACE Pro.)
Harga Anycubic Kobra S1 3D Printer di Print My Design ฿17,900 termasuk VAT (harga normal ฿18,500). Stok tersedia; stok di setiap cabang ditampilkan di halaman ini. Gratis ongkos kirim ke seluruh Thailand.
The build volume is 250 × 250 × 250 mm. Recommended speed is 300 mm/s, maximum 600 mm/s, with up to 20,000 mm/s² acceleration. Anycubic quotes about 13 minutes for a Benchy at 0.2 mm layers.
Yes, it is fully enclosed, with a PC front door and top cover. It prints PLA, PETG, ABS, ASA and TPU 95A, plus PC, PA and carbon- or glass-fibre filled filaments. The nozzle reaches 320 °C and the bed 120 °C.
It prints one colour out of the box. One ACE Pro gives 4 colours. Anycubic states the Kobra S1 supports up to two ACE Pro units for up to 8 colours; eight colours also need the 8 Colors Filament Hub.
Yes. The Kobra S1 accepts an ACE Pro later, and Print My Design sells the ACE for Kobra S1 separately. If you want colour from day one, the Kobra S1 Combo includes the ACE Pro.
Yes. After unboxing, you unlock the print head and bed as the manual shows. The on-screen setup connects Wi-Fi and the app, then runs a self-check, vibration compensation and LeviQ 3.0 auto-levelling. AI failure detection, runout detection and power-loss resume help during prints.
The printer is identical. The Kobra S1 Combo adds a 4-slot ACE Pro, giving 4-colour printing, drying up to 55 °C and automatic backup-spool refill. The Kobra S1 prints one colour from its spool holder.
Yes, if the TPU is 95A or harder. Feed it from the spool holder in single-colour mode and slow the print down. Never feed TPU through the ACE Pro. Anycubic says TPU of 85A or softer does not work on the Kobra S1.
Yes. Print My Design is run by Septillion Co., Ltd., an official distributor of Anycubic in Thailand. Printers come with a Thai warranty and after-sales support from our Thai team.
Yes. We issue full tax invoices to companies. Enter the company name and tax ID at checkout, or tell our staff at the branch.
Order online on this page, or buy at our True Digital Park, Seacon Bangkae and Central Sriracha branches.