Resin · 1 kg · LCD/MSLA
Elegoo Water-Washable Resin in 1 kg in ceramic grey, ฿990 inc VAT, for resin 3D printers. In stock in Thailand.
A water-washable formulation: rinse uncured resin off with plain water, no IPA needed. Suits printing at home or in an office, where the smell and the cost of solvent both matter.
The rinse water is contaminated — never pour it down a drain. Leave it in sunlight until the resin in it solidifies, then dispose of the solids.
Every resin print needs two steps before use: wash it to remove uncured resin, then cure it under UV so the surface hardens fully. Skip the cure and the part stays tacky and never reaches its proper strength. A wash-and-cure station makes this far more consistent than doing it by hand.
Uncured resin irritates skin and eyes. Wear nitrile gloves whenever you handle it, work somewhere ventilated, and keep the bottle out of sunlight and away from children. Never pour leftover resin or rinse water down a drain — leave it in sunlight until it solidifies and bin the solids.
It works with ordinary LCD/MSLA resin printers. Check that your machine’s UV wavelength matches what the bottle states before using it. Exposure time per layer depends on your printer and layer height, so run a test print before committing to a long job.
Order online for nationwide delivery, or collect at True Digital Park, Seacon Bangkae or Central Sriracha. If you would rather not print it yourself, send us the file and we will run it on our own resin machines.
Both, yes. Washing removes uncured resin; UV curing hardens the surface. Skip the cure and the part stays tacky and never reaches full strength.
It depends on your printer and layer height — there is no single figure that fits every machine. Run a test print first, or ask our team.
Ordinary LCD/MSLA resin printers. Check your machine’s UV wavelength against what the bottle states.
Never down a drain. Leave it in sunlight until it solidifies, then bin the solids. Rinse water is treated the same way.
Yes, at True Digital Park, Seacon Bangkae or Central Sriracha, or we deliver nationwide.
Resin is a light-sensitive liquid that an LCD/MSLA or SLA printer cures layer by layer with 405 nm light. It gives far finer detail and smoother surfaces than filament, which is why it is the standard for figures, jewellery and dental work.
Standard resin suits models and figures; ABS-like resin is tougher for functional parts; water-washable resin is the convenient choice at home; flexible, high-temperature, castable and dental lines are specialist materials chosen per job.
Use a resin printer whose screen size and resolution match the part — ELEGOO Mars and Saturn series for general work, Formlabs or HeyGears professional machines for dental and engineering parts. Take exposure settings from the printer's profile for the resin brand.
Wear nitrile gloves and work with ventilation. Wash parts in IPA or water as the resin type requires, then cure fully under UV. Store resin in its opaque bottle away from sunlight and heat.
