A 302 × 162 × 300 mm chamber gives you room for full helmets, terrain sections or a plate packed with commissions in one go. A 14-inch 16K panel keeps the detail sharp across that area, and the automated resin system tops the tank up and drains it again on its own — so long prints stop being a supervision job.
Large single-piece prints no longer need slicing into segments and gluing back together, and batch work becomes practical. The double-door design plus a transparent window makes it easy to reach in — or just look in — without disturbing a running job.
The smart resin system feeds from a 2 kg bottle as the level drops, then recycles what's left back into the bottle when you're finished. Sensors track resin level, bottle level and resin temperature, so a print won't die halfway through because the tank ran dry. Note that only Elegoo's 2 kg square bottles fit the system.
16K resolution combined with a COB source and a Fresnel collimating lens keeps exposure even from edge to edge, which matters far more on a 14-inch panel than a small one.
Four force sensors handle levelling automatically. The release film locks in without screws, the LCD is a sealed modular unit that swaps out without resin leaks, and the build plate uses a dual-grip quick-release.
Printing pauses and alerts if LED temperature passes 80 °C, power-loss recovery resumes after an outage, and the mechanical sensor watches for resin residue that could damage the screen.
Slice in ELEGOO SatelLite, send jobs over Wi-Fi or USB, and control the machine from the touchscreen or the ELEGOO Matrix app. The EL3D-4.0 system updates over the air, speaks 12 languages, and supports Wi-Fi cluster printing when you run more than one machine.
302 × 162 × 300 mm — roughly two and a half times the build area of a Saturn 4, using a 14-inch 16K mono LCD at 20 × 26 µm.
A two-way pump draws resin from a 2 kg bottle to keep the tank topped up during printing, then pumps the remainder back into the bottle afterwards. Sensors monitor tank level, bottle level and resin temperature.
No — the system only accepts 2 kg square bottles. Two empty square bottles come with the machine, so you can decant resin from other containers into them.
Up to 90 mm/h on the Z axis. Because resin printers expose a whole layer at once, a full plate of models takes no longer than a single one of the same height.
Any standard 405 nm UV resin, including Elegoo Standard, 8K Standard, ABS-Like V3.0 and Water-Washable. Third-party 405 nm resins work as well, though you will need to tune exposure yourself.
Easier than you would expect. The release film locks in without screws, the resin tank uses a quick-lock, and the LCD is a sealed modular unit that swaps out without resin leaking into the machine.
Yes. Alongside the 4-inch touchscreen you can use the ELEGOO Matrix app or ELEGOO SatelLite over Wi-Fi, and the chamber camera with its LED lets you check progress remotely.
