高细节树脂 · 灰白色 · 1 公斤 · ±0.05mm · 兼容全系 UltraCraft Reflex
PAP10 是 HeyGears 的高细节树脂，专为需要保留每一条棱线、每一颗铆钉、每一根发丝的小型件而生 — 28 mm 桌游微缩模型、比例模型、珠宝母版都很适合。灰白色哑光近似补土底漆，细节看得清楚，也方便直接上色。
UltraCraft Reflex RS、Reflex RS Turbo、Reflex、Reflex Turbo、Reflex 2 与 Reflex 2 Pro。脉冲剥离模块（Pulsing Release Module）为选配，非必需，但打印高件或纤细件时很有帮助。
HeyGears 原厂正品材料。由 Print My Design 授权经销，曼谷发货。
官方支持的机型为 UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro。脉冲剥离模块为选配，非必需，但打印高件或纤细件时很有帮助。
小型件的极致细节：28 mm 桌游微缩模型、比例模型、珠宝母版与外观验证样件。灰白色最小可打印柱径 0.15 mm，尺寸偏差控制在 ±0.05 mm 以内，室内摆放 3 年不变形。
灰白色是接近补土底漆的哑光中性色，检查细节和上色都更方便；黑色棱角更锐利，最小柱径可达 0.1 mm，拍照效果更出众。要涂装就选灰白色，要展示素模就选黑色。
使用 95% IPA 清洗：UltraCraft Wash 以 180 r/min 粗洗约 2 分钟＋精洗 1 分钟，随后在 UltraCraft Cure 中干式固化约 30 分钟。固化时间短而均匀可避免细节发白。
瓶盖拧紧、直立、避光干燥、常温保存；每次倒料前充分摇匀，因为颜料会沉淀。未开封瓶自标签生产日期起约可存放 12 个月。液态树脂会刺激皮肤，请佩戴丁腈手套与护目镜并保持通风。完全固化后的成品可安全触摸。
Resin is a light-sensitive liquid that an LCD/MSLA or SLA printer cures layer by layer with 405 nm light. It gives far finer detail and smoother surfaces than filament, which is why it is the standard for figures, jewellery and dental work.
Standard resin suits models and figures; ABS-like resin is tougher for functional parts; water-washable resin is the convenient choice at home; flexible, high-temperature, castable and dental lines are specialist materials chosen per job.
Use a resin printer whose screen size and resolution match the part — ELEGOO Mars and Saturn series for general work, Formlabs or HeyGears professional machines for dental and engineering parts. Take exposure settings from the printer's profile for the resin brand.
Wear nitrile gloves and work with ventilation. Wash parts in IPA or water as the resin type requires, then cure fully under UV. Store resin in its opaque bottle away from sunlight and heat.
