失蜡铸造树脂 · 紫色 · 1 公斤 · 含蜡 70~80% · 需脉冲剥离模块
PAC10 是珠宝铸造用的失蜡铸造树脂。含蜡量 70~80%，燃烧洁净，灰分仅 0.02%，最小壁厚可达 0.12 mm，公差 0.03 mm。实际效果就是爪镶更利落、刻字清晰可读，铸后打磨修整的时间大幅缩短，更快进入镶石环节。
UltraCraft Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro 本树脂必须搭配脉冲剥离模块套件使用，否则无法稳定打印。
HeyGears 原厂正品材料。由 Print My Design 授权经销，曼谷发货。
官方支持的机型为 UltraCraft Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro。本树脂必须搭配脉冲剥离模块套件使用，否则无法稳定打印。
可以。PAC10 是含蜡 70~80% 的铸造树脂，灰分仅 0.02%，在常规石膏烧失曲线下能够干净燃尽。请按石膏供应商针对树脂原型的升温曲线操作，并比雕蜡多保温一段时间。
最小壁厚 0.12 mm，尺寸公差 0.03 mm，足以覆盖花丝、密镶爪位与细小刻字。表面细腻度足够，多数件在铸造前需要的修整远少于通用树脂。
使用 95% IPA 清洗：UltraCraft Wash 以 180 r/min 粗洗约 2 分钟＋精洗 1 分钟，随后在 UltraCraft Cure 中干式固化约 30 分钟。固化时间短而均匀可避免细节发白。
瓶盖拧紧、直立、避光干燥、常温保存；每次倒料前充分摇匀，因为颜料会沉淀。未开封瓶自标签生产日期起约可存放 12 个月。液态树脂会刺激皮肤，请佩戴丁腈手套与护目镜并保持通风。完全固化后的成品可安全触摸。
Resin is a light-sensitive liquid that an LCD/MSLA or SLA printer cures layer by layer with 405 nm light. It gives far finer detail and smoother surfaces than filament, which is why it is the standard for figures, jewellery and dental work.
Standard resin suits models and figures; ABS-like resin is tougher for functional parts; water-washable resin is the convenient choice at home; flexible, high-temperature, castable and dental lines are specialist materials chosen per job.
Use a resin printer whose screen size and resolution match the part — ELEGOO Mars and Saturn series for general work, Formlabs or HeyGears professional machines for dental and engineering parts. Take exposure settings from the printer's profile for the resin brand.
Wear nitrile gloves and work with ventilation. Wash parts in IPA or water as the resin type requires, then cure fully under UV. Store resin in its opaque bottle away from sunlight and heat.
