高細節樹脂 · 灰白色 · 1 公斤 · ±0.05mm · 相容全系 UltraCraft Reflex
PAP10 是 HeyGears 的高細節樹脂，專為需要保留每一條稜線、每一顆鉚釘、每一根髮絲的小型件而生 — 28 mm 桌遊微縮模型、比例模型、珠寶母模都很適合。灰白色霧面近似補土底漆，細節看得清楚，也方便直接上色。
UltraCraft Reflex RS、Reflex RS Turbo、Reflex、Reflex Turbo、Reflex 2 與 Reflex 2 Pro。脈衝剝離模組（Pulsing Release Module）為選配，非必需，但列印高件或纖細件時很有幫助。
HeyGears 原廠正品材料。由 Print My Design 授權經銷，曼谷出貨。
官方支援的機型為 UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro。脈衝剝離模組為選配，非必需，但列印高件或纖細件時很有幫助。
小型件的極致細節：28 mm 桌遊微縮模型、比例模型、珠寶母模與外觀驗證樣件。灰白色最小可列印柱徑 0.15 mm，尺寸偏差控制在 ±0.05 mm 以內，室內擺放 3 年不變形。
灰白色是接近補土底漆的霧面中性色，檢查細節與上色都更方便；黑色稜角更銳利，最小柱徑可達 0.1 mm，拍照效果更出眾。要塗裝就選灰白色，要展示素模就選黑色。
使用 95% IPA 清洗：UltraCraft Wash 以 180 r/min 粗洗約 2 分鐘＋精洗 1 分鐘，隨後於 UltraCraft Cure 乾式固化約 30 分鐘。固化時間短而均勻可避免細節發白。
瓶蓋鎖緊、直立、避光乾燥、常溫保存；每次倒料前充分搖勻，因為顏料會沉澱。未開封瓶自標籤生產日期起約可存放 12 個月。液態樹脂會刺激皮膚，請配戴丁腈手套與護目鏡並保持通風。完全固化後的成品可安全觸摸。
Resin is a light-sensitive liquid that an LCD/MSLA or SLA printer cures layer by layer with 405 nm light. It gives far finer detail and smoother surfaces than filament, which is why it is the standard for figures, jewellery and dental work.
Standard resin suits models and figures; ABS-like resin is tougher for functional parts; water-washable resin is the convenient choice at home; flexible, high-temperature, castable and dental lines are specialist materials chosen per job.
Use a resin printer whose screen size and resolution match the part — ELEGOO Mars and Saturn series for general work, Formlabs or HeyGears professional machines for dental and engineering parts. Take exposure settings from the printer's profile for the resin brand.
Wear nitrile gloves and work with ventilation. Wash parts in IPA or water as the resin type requires, then cure fully under UV. Store resin in its opaque bottle away from sunlight and heat.
