
Anycubic Kobra S1 — 簡單,一次到位。 一款全封閉式 CoreXY FDM 3D 列印機,專為速度和可靠性而打造:列印速度高達 600 mm/s,全金屬熱端溫度高達 320 ℃,LeviQ 3.0 全自動調平,搭配 ACE Pro 系統可實現智慧多色列印。
CoreXY 結構在列印過程中保持結構堅固和精確,即使在 600 mm/s 的高速下也能保持穩定,實現快速、乾淨的列印成果。
全金屬熱端可達 320 ℃,加熱板可達 120 ℃,加上全封閉腔室,使 Kobra S1 除了 PLA 和 PETG 外,還能處理 ABS、ASA、PA、PC 和其他工程級線材。
LeviQ 3.0 全自動調平,噴嘴內置應變感測器,無需手動操作,即可提供出色、一致的首層列印。
搭配 Anycubic ACE Pro 套件 (Kobra S1 組合中包含),列印機可實現 4 至 8 種顏色的智慧多色列印,並具備線材烘乾和智慧送料功能。
| 列印技術 | FDM (封閉式 CoreXY) | 成型尺寸 | 250 × 250 × 250 mm |
|---|---|---|---|
| 列印速度 | 高達 600 mm/s | 熱端 | 全金屬,≤ 320 ℃ |
| 加熱床 | ≤ 120 ℃ | 調平 | LeviQ 3.0 全自動 |
| 擠出機 | 直接驅動 | 多色 | 搭配 ACE Pro 可實現 4–8 色 |
| 線材相容性 | PLA / PETG / ABS / ASA / TPU / PA / PC | 連接方式 | USB / WiFi / App |
Kobra S1 3D 列印機 · 列印平台 · 噴嘴套件 · 工具套件 · 電源線 · 使用手冊。(Kobra S1 組合額外包含 ACE Pro 多色系統。)
Anycubic Kobra S1 3D Printer在 Print My Design 的價格為 ฿17,900(含 VAT),原價 ฿18,500。有現貨,各門市庫存請見本頁。泰國全境免運費。
The build volume is 250 × 250 × 250 mm. Recommended speed is 300 mm/s, maximum 600 mm/s, with up to 20,000 mm/s² acceleration. Anycubic quotes about 13 minutes for a Benchy at 0.2 mm layers.
Yes, it is fully enclosed, with a PC front door and top cover. It prints PLA, PETG, ABS, ASA and TPU 95A, plus PC, PA and carbon- or glass-fibre filled filaments. The nozzle reaches 320 °C and the bed 120 °C.
It prints one colour out of the box. One ACE Pro gives 4 colours. Anycubic states the Kobra S1 supports up to two ACE Pro units for up to 8 colours; eight colours also need the 8 Colors Filament Hub.
Yes. The Kobra S1 accepts an ACE Pro later, and Print My Design sells the ACE for Kobra S1 separately. If you want colour from day one, the Kobra S1 Combo includes the ACE Pro.
Yes. After unboxing, you unlock the print head and bed as the manual shows. The on-screen setup connects Wi-Fi and the app, then runs a self-check, vibration compensation and LeviQ 3.0 auto-levelling. AI failure detection, runout detection and power-loss resume help during prints.
The printer is identical. The Kobra S1 Combo adds a 4-slot ACE Pro, giving 4-colour printing, drying up to 55 °C and automatic backup-spool refill. The Kobra S1 prints one colour from its spool holder.
Yes, if the TPU is 95A or harder. Feed it from the spool holder in single-colour mode and slow the print down. Never feed TPU through the ACE Pro. Anycubic says TPU of 85A or softer does not work on the Kobra S1.
Yes. Print My Design is run by Septillion Co., Ltd., an official distributor of Anycubic in Thailand. Printers come with a Thai warranty and after-sales support from our Thai team.
Yes. We issue full tax invoices to companies. Enter the company name and tax ID at checkout, or tell our staff at the branch.
Order online on this page, or buy at our True Digital Park, Seacon Bangkae and Central Sriracha branches.