TPU · 1.75 mm · 1 kg · 3 colours
Mitra resmi 3D StudioBambu Lab TPU 95A HF Filament — TPU filament, 1.75 mm on 1 kg spools in 3 colours (Red, White, Black), ฿1,590 inc VAT, in stock in Thailand.
TPU is a flexible, rubber-like material that bends and compresses without cracking. Good for gaskets, feet, protective cases and anything that has to flex.
TPU needs much slower print speeds than rigid filament, and works best on a direct-drive extruder.
Any FDM printer that takes 1.75 mm filament, which is the standard size on most machines. The right nozzle and bed temperatures depend on your printer — start from the figures Bambu Lab prints on the spool and adjust in 5 °C steps until surface finish and layer adhesion are both good.
Dark colours hide layer lines best, so parts look finished without sanding. White and pale shades are the better base for painting. Saturated colours separate one batch from another or make a part easy to spot. If one build needs several spools, order them together — shade can shift slightly between production batches.
Order online for nationwide delivery, or collect at True Digital Park, Seacon Bangkae or Central Sriracha. If you would rather not print it yourself, send us the file and our 3D printing service will run it for you.
3 colours are in stock: Red, White, Black.
Any FDM printer that takes 1.75 mm filament.
It depends on your printer and speed. Start from the figures Bambu Lab prints on the spool and adjust in 5 °C steps until surface finish and layer adhesion are both good.
TPU needs much slower print speeds than rigid filament, and works best on a direct-drive extruder.
Yes, at True Digital Park, Seacon Bangkae or Central Sriracha, or we deliver nationwide.
TPU is a rubber-like flexible filament; its hardness is given as a Shore value such as 95A, and the lower the number the softer it is. Printed parts squeeze, bend and spring back, and resist wear and oil.
| Nozzle temperature | 210–230 °C |
|---|---|
| Bed temperature | 30–60 °C |
| Enclosure | Not needed |
| Drying | 50–60 °C for 4–6 h before printing |
Typical ranges for this material; the spool label and the printer profile are the authority.
Good for protective cases, seals and gaskets, wheels, anti-slip feet, straps and anything that must flex.
Prints on most direct-drive machines at reduced speed; soft grades are usually fed from an external spool rather than through an automatic material changer. Check the printer manual for the exact rule.
TPU absorbs moisture very quickly. Dry it before every print if it bubbles or strings, and keep retraction to a minimum.
