Elegoo 泰国官方授权经销商10 英寸 16K 单色 LCD 将 14 × 19 µm 像素置于模型下方，因此皮肤纹理、锁子甲和精细字母清晰可见，而非阶梯状。倾斜剥离保持快速，加热料槽使树脂表现良好，自动调平意味着您开箱后几分钟即可开始打印。
金属料槽将树脂加热并保持在 30 °C。粘度下降，每层都能与上一层正确润湿，并且由于寒冷早晨树脂过冷而导致的故障大大减少。
倾斜剥离以一定角度剥离每层，而不是直接向上拉，因此吸力保持在较低水平。这使得打印机能够高速运行，同时保持薄壁和细针的完整性。
升级后的摄像头自带光源，因此监控不依赖于室内照明。它会监测空构建板和翘曲情况，并且延时摄影输出可供分享。
如果 LED 温度超过 80 °C，打印会自动暂停；断电恢复功能会从作业停止的地方继续；一键自检功能会在您将树脂用于长时间打印之前检查机器。
快拆防滑构建板，带双倾倒口的树脂料槽，滴水盘，可更换锁紧螺钉，激光雕刻板面以实现无忧附着力，PFA 离型膜，以及 9H 钢化玻璃 LCD 保护膜。
内置双频 Wi-Fi 支持多台机器的集群打印。EL3D-4.0 系统支持 OTA 更新，支持 12 种语言，并提供基于区域的曝光，因此您可以按高度调整曝光，而不是满足于一个折衷值。在 ELEGOO SatelLite 或 Chitubox 中切片。
Elegoo Saturn 4 Ultra 16K 3D Printer在 Print My Design 的价格为 ฿17,000（含 VAT）。有现货，各门店库存见本页。泰国全境免运费。
211.68 × 118.37 × 220 mm, with a 10-inch 16K mono LCD (15,120 × 6,230 pixels), 14 × 19 µm XY resolution and 0.01–0.2 mm layers.
The 16K panel has 15,120 × 6,230 pixels at 14 × 19 µm, against 19 × 24 µm on the 12K. It adds the 30 °C smart heating tank, the new AI camera with a chamber light, and built-in Wi-Fi instead of an external antenna. The build volume is slightly smaller: 211.68 × 118.37 × 220 mm against 218.88 × 122.88 × 220 mm.
Up to 150 mm/h with tilt release, or about 5.5 s per layer in fast mode with Chitubox defaults (2.5 s exposure). Elegoo rates it twice as fast as the Saturn 3 Ultra, and you can switch between fast and slow modes.
405 nm UV resins for LCD printers. Elegoo publishes starting settings for this model across its own Standard, ABS-Like, Water Washable, 8K, Plant-based, Tough and Dental resins. For other brands, run an exposure test first.
Yes. Prints come off the plate coated in uncured resin. Wash them in IPA, or water for water-washable resin, let them dry, then UV-cure them. The ELEGOO Mercury 3.0 Plus Wash and Cure does both steps in one machine.
Yes. It levels itself, runs a self-test, heats the resin automatically, and its camera and sensors warn about an empty plate, a warped model or low resin. Beginners still need to learn supports, safe resin handling, and washing and curing.
Choose the Saturn 4 Ultra 16K for detail and speed: 14 × 19 µm and up to 150 mm/h. Choose the Jupiter 2 16K for big parts: 302 × 162 × 300 mm, 20 × 26 µm and automatic resin feeding. The Jupiter SE uses a 6K screen (51 µm) with a 277.848 × 156.264 × 300 mm build volume.
Yes. Print My Design (Septillion Co., Ltd.) is an official distributor of Elegoo in Thailand. Printers carry a Thai warranty, with after-sales support from our Thai team.
Yes. Companies can request a full tax invoice by giving the company name, address and tax ID when ordering.
Order online on this page, or buy through our True Digital Park, Seacon Bangkae or Central Sriracha branch.
