Elegoo 泰国官方授权经销商ELEGOO Jupiter SE — 一款大幅面树脂3D打印机，配备12.8英寸6K单色LCD、51微米XY分辨率、自动树脂进料和回收系统、宽敞的277.848 × 156.264 × 300 mm成型体积、4点轻松调平以及升级的USB空气净化器。
Jupiter SE配备12.8英寸6K单色LCD，分辨率为5448 × 3064，XY精度为51微米，让您能够打印出细节惊人、清晰度卓越的模型。
Jupiter SE拥有277.848 × 156.264 × 300 mm（10.94 × 6.15 × 11.81英寸）的成型体积，为更宏大的项目提供了充足空间。您可以一次性打印更大的模型或多个零件，非常适合专业或商业用途。
Jupiter SE设计有自动树脂进料和回收装置，确保在打印过程中树脂的持续供应。自动树脂回收确保未使用的树脂被收集并回收以供将来使用，减少浪费并节省您的资金。
该打印机采用COB + 折射光源，减少光散射，提供均匀一致的光照，从而实现更清晰的细节、更平滑的最终打印件和精确的尺寸。
COB光源两侧设有冷却风扇和导热铜管，可有效散热，在打印过程中保持稳定温度，延长打印机的使用寿命。
Jupiter SE兼容Voxeldance Tango和ChituBox——选择适合您需求的切片工具。稳定运动结构——Z轴双直线导轨精度达0.02 mm，确保Z轴运动稳定精确。用户友好设计——构建板采用4点调平系统和激光雕刻表面，提供出色的附着力，一次调平后无需重新调平；旋转手柄使安装和拆卸构建板变得容易。
| 打印技术 | MSLA | LCD屏幕 | 12.8英寸6K单色LCD |
| 成型体积 | 277.848 × 156.264 × 300 mm | XY分辨率 | 51 μm (5448 × 3064) |
| 光源 | COB + 折射光源 (405nm) | Z轴精度 | 0.02 mm |
| 层厚 | 0.01–0.2 mm | 打印速度 | 最大70 mm/h |
| 操作屏幕 | 3.5英寸电阻式触摸屏 | 系统 | EL3D-3.0.1 |
| 切片软件 | ChituBox & Voxeldance Tango | 连接方式 | USB |
| 树脂管理 | 自动树脂进料和回收 | 空气净化器 | 升级的USB空气净化器 |
| 电源要求 | 100-240V 50/60Hz, 24V 7.5A | 打印机尺寸 | 479.9 × 377.4 × 657.5 mm |
| 净重 | 19.5 kg | 毛重 | 26.6 kg |
Jupiter SE 3D打印机 · USB空气净化器 · 构建平台 · 树脂槽 · 漏斗 · 自动树脂进料主模块 · 瓶盖模块 ×2 · 盖把手 ×2 · 口罩和手套 · 刮刀 · U盘 · 适配器 · 备用螺丝 · 工具包 · 用户手册。
Elegoo Jupiter SE 3D Printers在 Print My Design 的价格为 ฿19,990（含 VAT）。有现货，各门店库存见本页。泰国全境免运费。
277.848 × 156.264 × 300 mm (10.94 × 6.15 × 11.81 in), on a 12.8-inch 6K mono LCD with 5,448 × 3,064 pixels, which is 51 µm in XY. The printer itself is 479.9 × 377.4 × 657.5 mm and weighs 19.5 kg net.
The feeder tops the vat up from the bottle whenever the resin drops below two probes in the vat, so tall prints run without manual refills. After printing, you start resin recycling from the screen to pump the leftover resin back into the bottle. The feeder cap fits ELEGOO resin bottles.
Elegoo specifies a 405 nm light source, so it uses LCD resins that cure at 405 nm. For the automatic feeder, Elegoo's guide says the bottle cap only fits ELEGOO resin bottles.
ChituBox or Voxeldance Tango. Files go to the printer over USB, and you start jobs on the 3.5-inch touchscreen.
Yes, for beginners ready to learn the resin workflow. You level the 4-point plate once and the feeder refills resin for you. Like any resin printer, it needs washing, UV post-curing and gloves every time. If you want auto levelling and Wi-Fi, look at the Jupiter 2 16K or Saturn 4 Ultra 16K.
The Jupiter SE focuses on a large 277.848 × 156.264 × 300 mm volume at 51 µm. The Saturn 4 Ultra 16K is finer (14 × 19 µm) and faster but smaller (211.68 × 118.37 × 220 mm). The Jupiter 2 16K has a similar volume (302 × 162 × 300 mm) at 20 × 26 µm, with a heated vat, auto levelling and Wi-Fi.
Yes. A fresh print is coated in uncured resin. Wash it in the cleaner your resin label specifies, then post-cure it under UV on every side. We sell the ELEGOO Mercury 3.0 Plus Wash and Cure for both steps.
Yes. Septillion Co., Ltd., which runs Print My Design, is an official distributor of Elegoo in Thailand. Printers come with a Thai warranty and after-sales support from our Thai team.
Yes. We issue full tax invoices to companies. Enter the company name, address and tax ID when you order.
Order online on this page, or contact any of our three branches: True Digital Park, Seacon Bangkae and Central Sriracha.
