Elegoo 泰国官方授权经销商
Mercury 3.0 Plus Wash and Cure
302 × 162 × 300 mm 的成型腔为您提供了足够的空间，可一次性打印完整的头盔、地形部分或装满订单的整板模型。14 英寸 16K 面板在该区域保持细节清晰，自动树脂系统可自行加注和排空树脂槽 — 因此长时间打印不再需要人工监督。
大型单件打印不再需要切片和重新粘合，批量工作变得实用。双门设计加上透明窗口，方便伸手操作 — 或只是查看 — 而不会干扰正在进行的任务。
智能树脂系统在液位下降时从 2 kg 瓶中进料，然后在完成后将剩余树脂回收回瓶中。传感器跟踪树脂液位、瓶液位和树脂温度，因此打印不会因为树脂槽干涸而中途停止。请注意，只有 Elegoo 的 2 kg 方形瓶才适用于该系统。
16K 分辨率结合 COB 光源和菲涅尔准直透镜，使曝光从边缘到边缘均匀，这在 14 英寸面板上比在小面板上更为重要。
四个力传感器自动处理调平。离型膜无需螺丝即可锁定，LCD 是一个密封的模块化单元，无需树脂泄漏即可更换，构建板采用双握快速释放。
如果 LED 温度超过 80 °C，打印会暂停并发出警报；断电恢复可在停电后恢复；机械传感器会监测可能损坏屏幕的树脂残留物。
在 ELEGOO SatelLite 中切片，通过 Wi-Fi 或 USB 发送任务，并通过触摸屏或 ELEGOO Matrix 应用程序控制机器。EL3D-4.0 系统支持空中更新，支持 12 种语言，并在您运行多台机器时支持 Wi-Fi 集群打印。
Elegoo Jupiter2 16K 3D Printer在 Print My Design 的价格为 ฿39,200（含 VAT）。有现货，各门店库存见本页。泰国全境免运费。
302 × 162 × 300 mm, with a 14-inch 16K mono LCD (15,120 × 6,230 pixels) at 20 × 26 µm XY. Z speed reaches 90 mm/h, with 0.01–0.2 mm layers. Elegoo rates the build volume at about 2.5 times the Saturn 4.
A two-way pump tops the tank up from a 2 kg bottle when it drops below 250 ml during a print. When the printer is idle, it can pump leftover resin back. Elegoo designed it around its own 2 kg bottles, and a resin bottle and bottle cap module come in the box.
Elegoo says the Jupiter 2 currently supports only ELEGOO SatelLite and does not read .ctb files; more slicers are planned. SatelLite supports online slicing and Wi-Fi printing, and the ELEGOO Matrix app controls the printer from your phone.
Elegoo says most standard 405 nm resins work, including water-washable clear resin, and it publishes settings for its own resins. Run a small test print first. Some resins can confuse the auto-feed level sensing.
Yes. Prints are coated in uncured resin. Remove them from the plate, wash in IPA (or water for water-washable resin), then UV-cure them. Parts that fit can use the ELEGOO Mercury 3.0 Plus Wash and Cure; wash larger parts in a big enough container.
Yes. Auto-levelling and auto-feeding remove a lot of fiddly work. But it weighs 28.9 kg, needs about 1,150 × 670 × 660 mm with the doors open, and uses more resin per run. For small parts, the Saturn 4 Ultra 16K may suit you better.
The Saturn 4 Ultra 16K is finer (14 × 19 µm) and faster (150 mm/h) but smaller (211.68 × 118.37 × 220 mm). The Jupiter SE is similar in size (277.848 × 156.264 × 300 mm) but uses a 6K screen at 51 µm, manual levelling and no Wi-Fi.
Yes. Print My Design (Septillion Co., Ltd.) is an official distributor of Elegoo in Thailand. Printers carry a Thai warranty, with after-sales support from our Thai team.
Yes. Companies can request a full tax invoice by giving the company name, address and tax ID when ordering.
Order online on this page, or buy through our True Digital Park, Seacon Bangkae or Central Sriracha branch.
