Elegoo 泰國官方授權經銷商10 吋 16K 單色 LCD 讓 14 × 19 µm 像素呈現在您的模型下方，因此皮膚紋理、鎖子甲和精細字體都能清晰呈現，而非階梯狀。傾斜剝離保持快速，加熱料槽讓樹脂表現良好，自動校平意味著您開箱後幾分鐘即可開始列印。
金屬料槽將樹脂加熱並保持在 30 °C。黏度降低，每層都能與上一層正確濕潤，因寒冷樹脂在寒冷早晨造成的失敗情況大為減少。
傾斜剝離以一定角度剝離每層，而不是直接向上拉，因此吸力保持在低水平。這讓印表機在保持薄壁和細針完整的情況下高速運行。
升級後的攝影機有自己的光源，因此監控不依賴室內照明。它會監測空建構板和翹曲，縮時攝影輸出已準備好分享。
如果 LED 溫度超過 80 °C，列印會自動暫停；斷電恢復功能會從工作停止的地方繼續；一鍵自檢功能會在您將樹脂用於長時間列印之前檢查機器。
快拆防滑建構板、帶雙傾倒口的樹脂料槽、滴水盤、可更換鎖緊螺絲、雷射雕刻板面以實現無憂黏合、PFA 離型膜和 9H 鋼化玻璃 LCD 保護貼。
內建雙頻 Wi-Fi 支援多台機器的叢集列印。EL3D-4.0 系統支援 OTA 更新，支援 12 種語言，並提供分區曝光，讓您可以按高度調整曝光，而不是滿足於一個折衷值。使用 ELEGOO SatelLite 或 Chitubox 進行切片。
Elegoo Saturn 4 Ultra 16K 3D Printer在 Print My Design 的價格為 ฿17,000（含 VAT）。有現貨，各門市庫存請見本頁。泰國全境免運費。
211.68 × 118.37 × 220 mm, with a 10-inch 16K mono LCD (15,120 × 6,230 pixels), 14 × 19 µm XY resolution and 0.01–0.2 mm layers.
The 16K panel has 15,120 × 6,230 pixels at 14 × 19 µm, against 19 × 24 µm on the 12K. It adds the 30 °C smart heating tank, the new AI camera with a chamber light, and built-in Wi-Fi instead of an external antenna. The build volume is slightly smaller: 211.68 × 118.37 × 220 mm against 218.88 × 122.88 × 220 mm.
Up to 150 mm/h with tilt release, or about 5.5 s per layer in fast mode with Chitubox defaults (2.5 s exposure). Elegoo rates it twice as fast as the Saturn 3 Ultra, and you can switch between fast and slow modes.
405 nm UV resins for LCD printers. Elegoo publishes starting settings for this model across its own Standard, ABS-Like, Water Washable, 8K, Plant-based, Tough and Dental resins. For other brands, run an exposure test first.
Yes. Prints come off the plate coated in uncured resin. Wash them in IPA, or water for water-washable resin, let them dry, then UV-cure them. The ELEGOO Mercury 3.0 Plus Wash and Cure does both steps in one machine.
Yes. It levels itself, runs a self-test, heats the resin automatically, and its camera and sensors warn about an empty plate, a warped model or low resin. Beginners still need to learn supports, safe resin handling, and washing and curing.
Choose the Saturn 4 Ultra 16K for detail and speed: 14 × 19 µm and up to 150 mm/h. Choose the Jupiter 2 16K for big parts: 302 × 162 × 300 mm, 20 × 26 µm and automatic resin feeding. The Jupiter SE uses a 6K screen (51 µm) with a 277.848 × 156.264 × 300 mm build volume.
Yes. Print My Design (Septillion Co., Ltd.) is an official distributor of Elegoo in Thailand. Printers carry a Thai warranty, with after-sales support from our Thai team.
Yes. Companies can request a full tax invoice by giving the company name, address and tax ID when ordering.
Order online on this page, or buy through our True Digital Park, Seacon Bangkae or Central Sriracha branch.
