Elegoo 泰國官方授權經銷商
Mercury 3.0 Plus Wash and Cure
302 × 162 × 300 mm 的列印空間，讓您一次完成全尺寸頭盔、地形區塊或滿載委託的列印。14 吋 16K 面板確保整個區域的細節清晰，自動樹脂系統會自行補充樹脂槽並在列印後排空 — 因此長時間列印不再需要時刻監督。
大型單件列印不再需要分割成多個部分再黏合，批次作業也變得可行。雙門設計加上透明視窗，讓您無需中斷正在進行的作業，即可輕鬆伸手進入或僅僅查看。
智慧樹脂系統會根據液位下降從 2 kg 瓶中補充樹脂，並在完成後將剩餘樹脂回收至瓶中。感測器會追蹤樹脂液位、瓶中液位和樹脂溫度，因此列印不會因為樹脂槽乾涸而中途停止。請注意，只有 Elegoo 的 2 kg 方形瓶裝樹脂才適用於此系統。
16K 解析度結合 COB 光源和菲涅爾準直透鏡，確保從邊緣到邊緣的曝光均勻，這在 14 吋面板上比在小型面板上更為重要。
四個力感測器自動處理校平。離型膜無需螺絲即可鎖定，LCD 是一個密封的模組化單元，無需樹脂洩漏即可更換，列印板採用雙握把快速釋放設計。
如果 LED 溫度超過 80 °C，列印會暫停並發出警報；斷電恢復功能可在斷電後恢復列印；機械感測器會監測可能損壞螢幕的樹脂殘留物。
在 ELEGOO SatelLite 中切片，透過 Wi-Fi 或 USB 發送作業，並透過觸控螢幕或 ELEGOO Matrix 應用程式控制機器。EL3D-4.0 系統支援空中更新，支援 12 種語言，並在運行多台機器時支援 Wi-Fi 集群列印。
Elegoo Jupiter2 16K 3D Printer在 Print My Design 的價格為 ฿39,200（含 VAT）。有現貨，各門市庫存請見本頁。泰國全境免運費。
302 × 162 × 300 mm, with a 14-inch 16K mono LCD (15,120 × 6,230 pixels) at 20 × 26 µm XY. Z speed reaches 90 mm/h, with 0.01–0.2 mm layers. Elegoo rates the build volume at about 2.5 times the Saturn 4.
A two-way pump tops the tank up from a 2 kg bottle when it drops below 250 ml during a print. When the printer is idle, it can pump leftover resin back. Elegoo designed it around its own 2 kg bottles, and a resin bottle and bottle cap module come in the box.
Elegoo says the Jupiter 2 currently supports only ELEGOO SatelLite and does not read .ctb files; more slicers are planned. SatelLite supports online slicing and Wi-Fi printing, and the ELEGOO Matrix app controls the printer from your phone.
Elegoo says most standard 405 nm resins work, including water-washable clear resin, and it publishes settings for its own resins. Run a small test print first. Some resins can confuse the auto-feed level sensing.
Yes. Prints are coated in uncured resin. Remove them from the plate, wash in IPA (or water for water-washable resin), then UV-cure them. Parts that fit can use the ELEGOO Mercury 3.0 Plus Wash and Cure; wash larger parts in a big enough container.
Yes. Auto-levelling and auto-feeding remove a lot of fiddly work. But it weighs 28.9 kg, needs about 1,150 × 670 × 660 mm with the doors open, and uses more resin per run. For small parts, the Saturn 4 Ultra 16K may suit you better.
The Saturn 4 Ultra 16K is finer (14 × 19 µm) and faster (150 mm/h) but smaller (211.68 × 118.37 × 220 mm). The Jupiter SE is similar in size (277.848 × 156.264 × 300 mm) but uses a 6K screen at 51 µm, manual levelling and no Wi-Fi.
Yes. Print My Design (Septillion Co., Ltd.) is an official distributor of Elegoo in Thailand. Printers carry a Thai warranty, with after-sales support from our Thai team.
Yes. Companies can request a full tax invoice by giving the company name, address and tax ID when ordering.
Order online on this page, or buy through our True Digital Park, Seacon Bangkae or Central Sriracha branch.
