TPU flexible filament

TPU is a rubber-like flexible filament; its hardness is given as a Shore value such as 95A, and the lower the number the softer it is. Printed parts squeeze, bend and spring back, and resist wear and oil.

4 products from 3 brands✓ Prices include VAT✓ Full tax invoice✓ 3 physical branches

Typical print settings for TPU

Nozzle temperature	210–230 °C
Bed temperature	30–60 °C
Enclosure	Not needed
Drying	50–60 °C for 4–6 h before printing

Typical ranges for this material; the spool label and the printer profile are the authority.

What it is good for

Good for protective cases, seals and gaskets, wheels, anti-slip feet, straps and anything that must flex.

Which printer

Prints on most direct-drive machines at reduced speed; soft grades are usually fed from an external spool rather than through an automatic material changer. Check the printer manual for the exact rule.