UltiMaker PLA Filament Blue (0.75kg, 1.65lb)
Ultimaker PLA Filament Blue 750g is UltiMaker PLA in blue: 2.85 mm filament on a 750 g spool, designed for UltiMaker S series printers with AA or AA+ print cores.
Use it for prototypes, presentation and architectural models that need crisp detail, and for simple jigs and gauges on the shop floor. Thanks to PLA's low melting point, it also works for investment-casting patterns.
2.85 mm filament does not fit printers built for 1.75 mm. Please check your printer model before ordering; our team can confirm compatibility by chat.
PLA is the easiest filament to print: low shrinkage, no hot bed or enclosure required, crisp surfaces, vivid colours and almost no smell. It is the starting material for most users and for display pieces.
| Nozzle temperature | 190–220 °C |
|---|---|
| Bed temperature | 50–60 °C |
| Enclosure | Not needed |
| Drying | Rarely; store sealed |
Typical ranges for this material; the spool label and the printer profile are the authority.
Good for models, figures, prototypes, decor and any part that stays cool. Its limits: it softens around 55–60 °C, so it is wrong for parts in a parked car or near heat, and it is more brittle than PETG under impact.
Prints on open-frame machines such as the Bambu Lab A1 mini / A1 and Creality SPARKX i7
Store in a zip bag with desiccant. If the filament snaps easily or pops while printing, dry it at about 45–50 °C for two to four hours.
