PET · 2.85 mm · 750 g · 3 colours
Ultimaker PET-CF Filament — PET filament, 2.85 mm on 750 g spools in 3 colours (Blue, Black, Grey).
PET is a tough, chemically resistant polyester that prints strong, dimensionally stable parts. Good for mechanical components and parts that need to last.
Like PETG it takes up moisture — dry the spool before printing if it has been stored a while.
Any FDM printer that takes 2.85 mm filament, which is the standard size on most machines. The right nozzle and bed temperatures depend on your printer — start from the figures Ultimaker prints on the spool and adjust in 5 °C steps until surface finish and layer adhesion are both good.
Dark colours hide layer lines best, so parts look finished without sanding. White and pale shades are the better base for painting. Saturated colours separate one batch from another or make a part easy to spot. If one build needs several spools, order them together — shade can shift slightly between production batches.
Order online for nationwide delivery, or collect at True Digital Park, Seacon Bangkae or Central Sriracha. If you would rather not print it yourself, send us the file and our 3D printing service will run it for you.
The Ultimaker PET-CF Filament 2.85mm 750g costs ฿4,173 including VAT at Print My Design. It is in stock; stock at each branch is shown on this page.
3 colours: Blue, Black, Grey.
Any FDM printer that takes 2.85 mm filament.
It depends on your printer and speed. Start from the figures Ultimaker prints on the spool and adjust in 5 °C steps until surface finish and layer adhesion are both good.
Like PETG it takes up moisture — dry the spool before printing if it has been stored a while.
Yes, at True Digital Park, Seacon Bangkae or Central Sriracha, or we deliver nationwide.
PETG is tougher and more heat-resistant than PLA (usable to roughly 75–80 °C), with better chemical and moisture resistance, and it still prints on an open frame. The trade-offs are a glossier finish and more stringing between parts.
| Nozzle temperature | 230–250 °C |
|---|---|
| Bed temperature | 70–85 °C |
| Enclosure | Not needed |
| Drying | If it strings: 60–65 °C for 4–6 h |
Typical ranges for this material; the spool label and the printer profile are the authority.
Good for functional parts, enclosures, brackets, containers, anything that gets wet and short-term outdoor use. It is the material most makers reach for once PLA is not strong enough.
Prints on open-frame machines such as the Bambu Lab A1 mini / A1 and Creality SPARKX i7
CF and GF grades are the base material above with short fibres mixed in: parts come out stiffer, flatter and with a matte finish, but the fibres wear a brass nozzle out fast. Use a hardened-steel nozzle of 0.4 mm or larger and always dry the spool before printing.
PETG absorbs moisture faster than PLA. If stringing or rough surfaces appear, dry it at 60–65 °C for four to six hours and reduce part cooling so layers bond.
