Anycubic Kobra 2 Neo — a high-speed, easy-to-use entry-level FDM 3D printer. With print speeds up to 250 mm/s, fully automatic LeviQ 2.0 leveling, and a reliable direct-drive extruder, it's an ideal first printer for makers, students, and hobbyists.
A default 150 mm/s and up to 250 mm/s — roughly 5× faster than typical entry-level printers — backed by a sturdy frame and a 7000 rpm part-cooling fan for clean, fast results.
Fully automatic 25-point leveling with smart Z-offset delivers a flat first layer every time — no manual adjustment and no test prints required.
The direct-drive dual-gear extruder and 260 °C hotend handle PLA, PETG, ABS and flexible TPU with strong, consistent extrusion. The 0.4 mm nozzle is easily replaceable.
A magnetic PEI-coated spring-steel plate makes part removal effortless, while filament run-out detection and power-loss resume protect long prints. Print directly from a USB drive or microSD card.
| Printing Technology | FDM (Fused Deposition Modeling) |
| Build Volume | 220 × 220 × 250 mm |
| Print Speed | 150 mm/s (default) · up to 250 mm/s |
| Acceleration | up to 2,500 mm/s² |
| Extruder | Direct-drive dual-gear |
| Nozzle | 0.4 mm (replaceable) |
| Max Nozzle Temp | 260 °C |
| Build Plate | PEI-coated spring steel (magnetic) |
| Max Bed Temp | 110 °C |
| Layer Height | 0.05–0.3 mm |
| Leveling | LeviQ 2.0 auto-leveling (25-point) + Z-offset |
| Filament Support | PLA · PETG · ABS · TPU |
| Filament Detection | Supported |
| Power-Loss Resume | Supported |
| Part-Cooling Fan | 7000 rpm |
| Connectivity | USB · microSD card |
| Slicer | Anycubic Slicer / Cura |
| Machine Size | 430 × 405 × 486 mm |
| Weight | ~6.5 kg |
Kobra 2 Neo Printer (largely pre-assembled) · PEI Spring-Steel Plate · Tool Kit · Spare Nozzle · Filament Sample · Power Cable · microSD / USB · Quick Start Guide.
A default 150 mm/s and up to 250 mm/s — around 5× faster than typical entry-level printers.
No. LeviQ 2.0 performs fully automatic 25-point leveling with smart Z-offset, so the first layer is flat every time.
220 × 220 × 250 mm — enough for most everyday models and functional parts.
PLA, PETG, ABS and flexible TPU, handled by its direct-drive extruder and 260 °C hotend.
It arrives largely pre-assembled with quick setup. Print from a USB drive or microSD card.
Yes — filament run-out detection and power-loss resume safeguard long jobs. Sold by Septillion, the authorized reseller, with local warranty and support.
