Official Elegoo distributor in ThailandELEGOO Mercury 3.0 Plus Wash and Cure (sold by ELEGOO as Mercury Plus V3.0) is a 2-in-1 washing and UV curing station for resin prints with a 7.5 L wash tank. It is designed for ELEGOO resin printers and works with most LCD/DLP/SLA machines.
Parts from Jupiter-series printers must come off the build plate before washing; for other models, compare part height with the max wash size. In the box: main unit, cleaning bucket, curing turntable, basket, two adjustable brackets, power adapter, tools and manual.
The ELEGOO Mercury 3.0 Plus Wash and Cure costs ฿6,000 including VAT at Print My Design. It is in stock; stock at each branch is shown on this page.
The maximum washing size is 214 × 135 × 180 mm with the build plate attached, or 230 × 135 × 260 mm using the basket. The maximum curing size is Ø250 × 290 mm (diameter × height).
It works with the ELEGOO Mars and Saturn series and most LCD/DLP/SLA resin 3D printers on the market. Check the maximum wash volume against your model's size to confirm fit.
A 360° rotating turntable with 24 × 405 nm UV lamps, combined with reflective mirrors, cures models evenly from top to bottom. Curing time is adjustable up to 30 minutes, and the anti-UV cover blocks 99.9% of UV light.
