Official Elegoo distributor in Thailand
Mercury 3.0 Plus Wash and Cure
The Elegoo Jupiter 2 16K is a large-format MSLA resin 3D printer with a 14-inch 16K mono LCD. It resolves 20 × 26 µm in XY and builds up to 302 × 162 × 300 mm. It feeds and recycles resin automatically, heats the tank to 30 °C and levels itself with four force sensors. It suits print shops, figure studios, cosplay makers and design teams that print big parts or full batches.
Elegoo rates its build volume at about 2.5 times that of the Saturn 4. Parts that once had to be split need fewer pieces, and batch jobs need fewer runs.
The Jupiter 2 16K has the same pixel count as the Saturn 4 Ultra 16K, spread over a bigger screen. Each pixel is therefore 20 × 26 µm. That is plenty for large figures, models and prototype parts. If your main work is tiny miniatures, the 10-inch Saturn resolves finer detail.
The plate is almost twice the area of the Saturn 4 Ultra 16K, and prints can reach 30 cm tall. A resin printer exposes the whole layer at once. So a full plate takes about as long as one part of the same height. Z speed tops out at 90 mm/h, with layers from 0.01 to 0.2 mm.
With auto-feeding on, the printer tops the tank up from a 2 kg bottle whenever it drops below 250 ml. After the print, it can pump the leftover resin back into the bottle. Sensors watch the bottle level and resin temperature. Elegoo designed the system around its own 2 kg bottles.
The printer measures 465 × 508.1 × 648.1 mm and weighs 28.9 kg. With the doors fully open it needs about 1,150 × 670 × 660 mm. A 75 mm exhaust port at the back lets you duct fumes outside.
| Model | LCD | XY resolution | Build volume (mm) | Max speed |
|---|---|---|---|---|
| Jupiter 2 16K | 14-inch 16K | 20 × 26 µm | 302 × 162 × 300 | 90 mm/h |
| Saturn 4 Ultra 16K | 10-inch 16K | 14 × 19 µm | 211.68 × 118.37 × 220 | 150 mm/h |
| Jupiter SE | 12.8-inch 6K | 51 µm | 277.848 × 156.264 × 300 | 70 mm/h |
Choose the Jupiter 2 16K when part size and volume matter most. The Saturn 4 Ultra 16K is the better pick for small, highly detailed work. The Jupiter SE has a similar build volume. It uses a 6K screen at 51 µm, manual levelling and USB-only file transfer.
Print My Design is run by Septillion Co., Ltd., an official distributor of Elegoo in Thailand. Every printer carries a Thai warranty, and our Thai team handles after-sales support.
Companies can get a full tax invoice. Order online on this page, or contact our True Digital Park, Seacon Bangkae or Central Sriracha branch.
The Elegoo Jupiter2 16K 3D Printer costs ฿39,200 including VAT at Print My Design. It is in stock; stock at each branch is shown on this page. Delivery is free anywhere in Thailand.
302 × 162 × 300 mm, with a 14-inch 16K mono LCD (15,120 × 6,230 pixels) at 20 × 26 µm XY. Z speed reaches 90 mm/h, with 0.01–0.2 mm layers. Elegoo rates the build volume at about 2.5 times the Saturn 4.
A two-way pump tops the tank up from a 2 kg bottle when it drops below 250 ml during a print. When the printer is idle, it can pump leftover resin back. Elegoo designed it around its own 2 kg bottles, and a resin bottle and bottle cap module come in the box.
Elegoo says the Jupiter 2 currently supports only ELEGOO SatelLite and does not read .ctb files; more slicers are planned. SatelLite supports online slicing and Wi-Fi printing, and the ELEGOO Matrix app controls the printer from your phone.
Elegoo says most standard 405 nm resins work, including water-washable clear resin, and it publishes settings for its own resins. Run a small test print first. Some resins can confuse the auto-feed level sensing.
Yes. Prints are coated in uncured resin. Remove them from the plate, wash in IPA (or water for water-washable resin), then UV-cure them. Parts that fit can use the ELEGOO Mercury 3.0 Plus Wash and Cure; wash larger parts in a big enough container.
Yes. Auto-levelling and auto-feeding remove a lot of fiddly work. But it weighs 28.9 kg, needs about 1,150 × 670 × 660 mm with the doors open, and uses more resin per run. For small parts, the Saturn 4 Ultra 16K may suit you better.
The Saturn 4 Ultra 16K is finer (14 × 19 µm) and faster (150 mm/h) but smaller (211.68 × 118.37 × 220 mm). The Jupiter SE is similar in size (277.848 × 156.264 × 300 mm) but uses a 6K screen at 51 µm, manual levelling and no Wi-Fi.
Yes. Print My Design (Septillion Co., Ltd.) is an official distributor of Elegoo in Thailand. Printers carry a Thai warranty, with after-sales support from our Thai team.
Yes. Companies can request a full tax invoice by giving the company name, address and tax ID when ordering.
Order online on this page, or buy through our True Digital Park, Seacon Bangkae or Central Sriracha branch.
