Official Elegoo distributor in ThailandThe Elegoo Jupiter SE is a large-format MSLA resin 3D printer. It pairs a 12.8-inch 6K mono LCD with a 277.848 × 156.264 × 300 mm build volume and 51 µm XY resolution. Automatic resin feeding and recycling keeps the vat topped up during long prints. It suits print shops, figure and cosplay makers, and design teams that need big resin parts or full plates of small ones.
51 µm XY. This is the size of one pixel on the screen. Smaller pixels capture finer detail. At 51 µm, medium and large parts come out smooth and raised text stays sharp. For tiny miniatures with hair-fine detail, a 16K model has the edge.
A large plate saves time. A resin printer exposes the whole layer at once. So a layer takes about the same time with one part or a full plate. Filling the plate is the most efficient way to run it.
300 mm of height. Tall or long parts need fewer splits, which means fewer glue seams.
70 mm/h. This is the maximum vertical speed. Real speed depends on the resin, the layer height and your exposure settings.
Automatic resin handling. Two probes in the vat watch the resin level. When the level drops below them, the feeder refills from the bottle. The feeder cap is made for ELEGOO resin bottles.
A simple workflow. Slice in ChituBox or Voxeldance Tango, copy the file over USB and start the job on the 3.5-inch touchscreen.
We sell all three Elegoo resin printers. They differ mainly in size, resolution and automation.
| Model | LCD | XY | Build volume (mm) | Max speed |
|---|---|---|---|---|
| Jupiter SE | 12.8" 6K | 51 µm | 277.848 × 156.264 × 300 | 70 mm/h |
| Jupiter 2 16K | 14" 16K | 20 × 26 µm | 302 × 162 × 300 | 90 mm/h |
| Saturn 4 Ultra 16K | 10" 16K | 14 × 19 µm | 211.68 × 118.37 × 220 | 150 mm/h |
Choose the Jupiter SE for a large plate, automatic resin feeding and a plain USB workflow. The Jupiter 2 16K has a similar volume with finer pixels, plus a heated vat, auto levelling, a camera and Wi-Fi. The Saturn 4 Ultra 16K is smaller, but it has the finest pixels and the highest speed of the three. It suits detailed miniatures.
A fresh print is still coated in uncured resin. Wash it and post-cure it under UV every time. Only then is the part fully hard and ready to paint.
Septillion Co., Ltd., which runs Print My Design, is an official distributor of Elegoo in Thailand. Every Jupiter SE comes with a Thai warranty and after-sales support from our Thai team. Companies can get a full tax invoice. Order online on this page, or contact our True Digital Park, Seacon Bangkae and Central Sriracha branches.
The Elegoo Jupiter SE 3D Printers costs ฿19,990 including VAT at Print My Design. It is in stock; stock at each branch is shown on this page. Delivery is free anywhere in Thailand.
277.848 × 156.264 × 300 mm (10.94 × 6.15 × 11.81 in), on a 12.8-inch 6K mono LCD with 5,448 × 3,064 pixels, which is 51 µm in XY. The printer itself is 479.9 × 377.4 × 657.5 mm and weighs 19.5 kg net.
The feeder tops the vat up from the bottle whenever the resin drops below two probes in the vat, so tall prints run without manual refills. After printing, you start resin recycling from the screen to pump the leftover resin back into the bottle. The feeder cap fits ELEGOO resin bottles.
Elegoo specifies a 405 nm light source, so it uses LCD resins that cure at 405 nm. For the automatic feeder, Elegoo's guide says the bottle cap only fits ELEGOO resin bottles.
ChituBox or Voxeldance Tango. Files go to the printer over USB, and you start jobs on the 3.5-inch touchscreen.
Yes, for beginners ready to learn the resin workflow. You level the 4-point plate once and the feeder refills resin for you. Like any resin printer, it needs washing, UV post-curing and gloves every time. If you want auto levelling and Wi-Fi, look at the Jupiter 2 16K or Saturn 4 Ultra 16K.
The Jupiter SE focuses on a large 277.848 × 156.264 × 300 mm volume at 51 µm. The Saturn 4 Ultra 16K is finer (14 × 19 µm) and faster but smaller (211.68 × 118.37 × 220 mm). The Jupiter 2 16K has a similar volume (302 × 162 × 300 mm) at 20 × 26 µm, with a heated vat, auto levelling and Wi-Fi.
Yes. A fresh print is coated in uncured resin. Wash it in the cleaner your resin label specifies, then post-cure it under UV on every side. We sell the ELEGOO Mercury 3.0 Plus Wash and Cure for both steps.
Yes. Septillion Co., Ltd., which runs Print My Design, is an official distributor of Elegoo in Thailand. Printers come with a Thai warranty and after-sales support from our Thai team.
Yes. We issue full tax invoices to companies. Enter the company name, address and tax ID when you order.
Order online on this page, or contact any of our three branches: True Digital Park, Seacon Bangkae and Central Sriracha.
