The Bambu Lab Smoke Purifier For H2 Series is a multi-stage fume purifier for Bambu Lab H2-series machines. It traps fine particles and VOCs from laser work and 3D printing. This listing is the US version, as named in our system.
Highlights
- Filters out 99% of particles down to 0.3 µm, plus VOCs
- G4 primary filter, F8 medium filter, carbon filter rated at 1200 mg/g adsorption and HEPA H13
- Compact body with high dust-holding capacity, so filters last longer
- Beeps when a filter reaches end of life
In the box
The purifier, a 2 m ventilation pipe with clamp, three primary filters (one pre-installed), and one F8 and one H13 filter, both pre-installed.
Before you buy
- Works with the whole H2 series; non-laser models also need the pipe adapter and a pipe from the printer.
- It is switched on and speed-adjusted by hand, not from the printer.
- Suggested filter changes: primary every 80–100 h, F8 every 300–500 h, HEPA every 800–1000 h.
- After fitting, tug the pipe to check it holds; secure it firmly if it runs out of a window.
Ask our team by chat about the US-version plug and your printer model before ordering.
Official partner of 3D Studio
