Formlabs Authorized Partner in ThailandAn additional bucket set for the Formlabs Form Studio Wash+Cure. Use it as the second stage after the main wash: a rinse in cleaner solvent lifts the thin film of resin that a saturated bath leaves behind, so parts come out cleaner and the main bucket saturates more slowly. The set includes a wash bucket with lid, an internal basket and a solvent squeeze bottle.
Washing batch after batch in one bucket loads the solvent with dissolved resin until it saturates. Parts washed in saturated solvent keep a faint residue that stays tacky or turns cloudy after curing. Two-stage washing uses the first bucket to remove most of the resin, then moves the parts to a second bucket of clean solvent for a final rinse. The result is a cleaner surface, which matters most on clear parts where any residue shows as haze, and the first bucket lasts longer because the second one takes over the final rinse.
The Form Studio Wash+Cure switches between wash and cure automatically when a bucket is inserted or removed, so two-stage washing is simply a bucket swap: run the first wash in the original bucket, raise the basket so the parts drip, then drop in the Rinse Bucket filled with clean solvent for the final pass. It takes the same solvents the machine supports: IPA, TPM or Formlabs Resin Washing Solution. The lid limits IPA evaporation between sessions, and the squeeze bottle reaches channels and undercuts the bath cannot.
Form Studio 1 users printing several batches a day, work that needs a consistently clean surface such as clear parts or prototypes that will be painted, and labs or clinics that want to change the main bath less often. If you wash parts only occasionally, the bucket supplied with the machine is enough and the Rinse Bucket can be added at any time.
Genuine Formlabs product sold by Print My Design, a Formlabs Authorized Partner in Thailand. A full tax invoice is available on every order.
The Formlabs Form Studio Wash+Cure Rinse Bucket costs ฿2,890 including VAT at Print My Design (regular price ฿3,290). It is open for pre-order. Reserve it with a ฿10,000 deposit and pay the balance when it arrives.
No. The bucket supplied with the machine is enough for occasional washing. The Rinse Bucket adds a second, cleaner bath for a final rinse, which gives cleaner surfaces and keeps the main solvent usable for longer.
The same ones the Form Studio Wash+Cure supports: IPA, TPM or Formlabs Resin Washing Solution.
No. This bucket is made for the Form Studio Wash+Cure. Form Wash and Form Wash L use their own buckets.
No. The Wash+Cure switches between wash and cure automatically when a bucket is inserted or removed, so swapping to the rinse bucket needs no change in settings.
