The same tank that ships with the Form Studio 1, built around a strong, flexible Release Texture V2 film tuned for fast print speeds and fine feature resolution. Every tank includes a reusable lid, so tanks stack and store resin outside the printer; keep one per resin colour or type and switching material is just sliding in another tank.
Formlabs warns that those resins contain ingredients that attack the standard film: it can degrade quickly and leak, letting resin into the printer.
Rated for at least 75,000 layers, roughly 190 prints of average height (39 mm) at 100 µm according to Formlabs. The film cannot be replaced, so the tank itself is the consumable. Inspect and clean it as the Formlabs guide describes to get the full life.
Keep at least one spare tank per resin you use regularly so you can change material without cleaning. Full tax invoice on every order; our team at True Digital Park, Seacon Bangkae and Central Sriracha can advise.
No. The Form Studio 1 Resin Tank fits the Form Studio 1 only; Form 4 printers use their own tank.
No. Those materials damage the standard film and can leak. Use the Form Studio 1 Resin Tank Pro for Tough 1500 Resin V2 and for anything printed in Open Material Mode.
No. Formlabs rates the tank for more than 75,000 layers, and when the film wears out the whole tank is replaced.
One per resin you keep in rotation. Each tank has a lid, so resin stays in the tank between jobs and switching colours takes seconds.
Yes. After three days without a print the printer shows a warning asking you to stir the tank with the plastic scraper from the accessories box, because the Form Studio 1 has no mixer arm. Shake cartridges periodically as well.
