Anycubic ACE For Kobra3

Anycubic ACE For Kobra3 is the ACE Pro (Anycubic Color Engine Pro) made for the Anycubic Kobra 3: a four-spool box with a built-in dryer that lets the Kobra 3 print in several colours and change filament by itself.

What it does

Each filament has its own tube and loads and unloads automatically. When a spool runs out, the ACE Pro moves to one of the same material and colour, so long prints keep going. It dries filament while printing, up to 55°C for up to 24 hours.

Specs and features

• 4 colours per unit, or 8 with two ACE Pro units (needs supporting firmware and slicer)
• Printable 1.75 mm filaments: PLA, PETG, ABS, ASA, PET, PA, PC, PP
• Dries PLA, PETG, TPU and PVB well (TPU can be dried but not fed through the ACE Pro)
• Auto-detects material and colour on chipped Anycubic filament
• Power rating 230 W; weight 4.6 kg

Setup tips

Anycubic recommends placing the ACE Pro on the left of the Kobra 3, as the PTFE tubes and hub are designed for that side; on the right, feeding can become irregular. It is controlled by the printer and cannot dry filament on its own.

This is the Kobra 3 version (Anycubic also lists the Kobra 3 V2 for ACE Pro). Check your printer model before ordering, or ask our team by chat.