Anycubic Wash & Cure 3 is a 2-in-1 washing and UV curing station for resin prints from LCD printers up to 7.3 inches. It cleans parts in isopropyl alcohol (IPA), then cures them with UV light in the same machine.
Highlights
- 4 L washing bucket with a 3 L washing basket
- Two-level PP basket washes parts on the build plate, with heights of 100 mm and 165 mm for 5.9–7.3 inch plates, to save IPA
- 10 × 405 nm LEDs with a lens design; Anycubic quotes 20% more even curing than the 2.0 model
- Adjustable gooseneck light adds 30,000 µW/cm² at 1–3 cm for shaded spots such as model tops and figure skirts
- One button switches wash and cure; set 1–30 minutes with the rotary knob
Specs
- Max washing size 165 × 100 × 180 mm
- Max curing size 160 × 180 mm
- 36 W; 2.7 kg; 216 × 217 × 310 mm
Use and care
Use alcohol above 95% concentration and let parts air-dry before curing, or they may turn white. Anycubic suggests replacing or recycling the solvent after about 30 models: let it settle, decant the clear layer, and sun-cure the residue before disposal.
Official Anycubic distributor in Thailand
