Mixable colour resin · Magenta · 1 kg · CMYK + white system · Reflex / Reflex 2
PAM10 is HeyGears’ mixable colour resin system. Instead of buying a bottle for every shade you need, you mix your own from the CMYK plus white set and print the exact colour you designed — and because all five share one chemistry, the print settings and the success rate stay the same whatever ratio you pour. Magenta is one of the three primaries — it drives every pink, purple and red in the system, and prints neat as a strong process magenta.
UltraCraft Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.
Genuine HeyGears material. Sold by Print My Design — authorised dealer, ships from Bangkok.
It is officially supported on UltraCraft Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro. The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.
Buy the CMYK plus white bottles, weigh them on a scale and stir. Because all five share the same chemistry, your exposure settings and success rate stay the same no matter what ratio you use. Keep a note of your recipes by weight and you can reproduce a shade exactly next month.
You can print it straight — this bottle is a finished resin on its own. Mixing is optional and only matters when you want a shade that is not in the set. Many studios keep white and black for tinting and print the primaries neat.
Wash in 95% IPA — about 2 minutes rough wash plus 1 minute fine wash in an UltraCraft Wash at 180 r/min — then dry-cure for roughly 30 minutes in an UltraCraft Cure. Short, even curing keeps fine detail from going chalky.
Keep the bottle closed, upright, dark and dry at room temperature, and shake it well before every pour because the pigment settles. Unopened bottles keep for about 12 months from the production date on the label. Liquid resin irritates skin, so wear nitrile gloves and eye protection and work in a ventilated space. Fully cured parts are safe to handle.
