Water-washable resin · Translucent Pink · 1 kg · 2 min water rinse · no IPA needed
PAWW20 is the water-washable resin, and it exists to make the boring part of resin printing shorter. Two minutes under running water and the part is clean — no IPA, no solvent smell, no jar of dirty alcohol on the bench. Final curing takes about five minutes, so a model can go from plate to painted in an afternoon.
UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro The Pulsing Release Module is not used with this resin.
Genuine HeyGears material. Sold by Print My Design — authorised dealer, ships from Bangkok.
It is officially supported on UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro. The Pulsing Release Module is not used with this resin.
Correct. Two minutes under running water clears the uncured resin, then blow the part dry and cure it for about five minutes. Important: never pour the waste water down the drain. Let it evaporate, cure the residue under UV or sunlight, and dispose of the solid.
Not this one. PAWW20 keeps genuinely useful toughness — HeyGears notes that parts can still be drilled and tapped up to a month after printing — and the surface comes out smooth. It is aimed at concept prototypes and quick iterations rather than long-term structural parts.
Just rinse the printed part in plain water for a couple of minutes, blow it dry, then UV-cure. No IPA needed. Do not pour the waste water down the drain: evaporate it, cure the residue under UV or sunlight, and dispose of it as solid waste.
Keep the bottle closed, upright, dark and dry at room temperature, and shake it well before every pour because the pigment settles. Unopened bottles keep for about 12 months from the production date on the label. Liquid resin irritates skin, so wear nitrile gloves and eye protection and work in a ventilated space. Fully cured parts are safe to handle.
