Print My Design
SHOP›CONSUMABLES›HEYGEARS›HEYGEARS ULTRAPRINT MODELING TRANSPARENT 1KG (PAT10)
HeyGears HeyGears UltraPrint Modeling Transparent 1kg (PAT10)
HeyGears logo
HEYGEARS · Authorized dealer

HeyGears UltraPrint Modeling Transparent 1kg (PAT10)

Clear resin · Transparent · 1 kg · 88.5% transmittance · Reflex / Turbo / Reflex 2 / 2 Pro

฿ 3,531incl. VAT
/ rolls
In stock — ready
Total · 1 rolls฿3,531
1
🏬 Availability
Online warehouse · ships nationwide✓ Ready to ship
True Digital ParkOut of stock
Seacon BangkaeOut of stock
Central SrirachaOut of stock

HeyGears UltraPrint-Modeling PAT10 — Transparent, 1 kg

PAT10 is the clear resin. It reaches 88.5 % light transmittance with 5.4 % haze, which is close to cast acrylic, and it is engineered not to yellow — HeyGears rates the colour as stable across 8 years of indoor use. It is also tough rather than glassy, and safe against skin, so you can print wearables with it.

HeyGears UltraPrint-Modeling PAT10 transparent resin bottle

Who is it for?

  • Transparent figurines and art pieces – ice, water, crystal and glass effects.
  • Light pipes, lenses and covers for consumer electronics.
  • Wearable prototypes – the cured material is skin-safe.
  • Display parts that must stay clear for years, not months.

Why people choose it

  • 88.5 % light transmittance and only 5.4 % haze.
  • Anti-yellowing – colour stable over 8 years of indoor use.
  • High toughness – clear parts that are not fragile.
  • Skin-safe once fully cured, suitable for wearable products.

Which printers can use it?

UltraCraft Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.

Good to know before you print

  • Shake the bottle well before pouring; pigment settles.
  • Wash in 95% IPA, then UV-cure. Short, even cure times keep fine detail from going chalky.
  • Store closed, upright, dark and dry at room temperature.
  • Wear nitrile gloves and work in a ventilated space while the resin is liquid.

See it in action

Genuine HeyGears material. Sold by Print My Design — authorised dealer, ships from Bangkok.

FAQ

Common questions

Which HeyGears printers can I use it with?

It is officially supported on UltraCraft Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro. The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.

How clear is it really?

88.5 % light transmittance with 5.4 % haze — close to cast acrylic. Straight off the printer it will look frosted; the clarity comes from post-processing. Sand progressively, then either polish or apply a thin clear coat, and the part turns properly see-through.

Will it go yellow?

It is formulated against yellowing and HeyGears rates the colour as stable across 8 years of indoor use. Keep finished pieces out of direct sunlight and behind UV-filtered glass if they live in a bright room, and they will stay clear far longer.

How do I wash and cure it?

Wash in 95% IPA — about 2 minutes rough wash plus 1 minute fine wash in an UltraCraft Wash at 180 r/min — then dry-cure for roughly 30 minutes in an UltraCraft Cure. Short, even curing keeps fine detail from going chalky.

How should I store it, and is it safe to handle?

Keep the bottle closed, upright, dark and dry at room temperature, and shake it well before every pour because the pigment settles. Unopened bottles keep for about 12 months from the production date on the label. Liquid resin irritates skin, so wear nitrile gloves and eye protection and work in a ventilated space. Fully cured parts are safe to handle.