Print My Design
SHOP›CONSUMABLES›HEYGEARS›HEYGEARS ULTRAPRINT PRODUCTION ASH GRAY 1KG (PAP10)
HeyGears HeyGears UltraPrint Production Ash Gray 1kg (PAP10)
HeyGears logo
HEYGEARS · Authorized dealer

HeyGears UltraPrint Production Ash Gray 1kg (PAP10)

Fine-detail resin · Ash Grey · 1 kg · ±0.05 mm · fits every UltraCraft Reflex

฿ 2,247incl. VAT
/ rolls
In stock — ready
Total · 1 rolls฿2,247
1
🏬 Availability
Online warehouse · ships nationwide✓ Ready to ship
True Digital ParkOut of stock
Seacon BangkaeOut of stock
Central SrirachaOut of stock

HeyGears UltraPrint-Production PAP10 — Ash Grey, 1 kg

PAP10 is HeyGears’ fine-detail resin. It is built for small parts where every edge, rivet and hair strand has to stay crisp — 28 mm tabletop miniatures, scale models and jewellery masters. The Ash Grey tone is neutral and matte, almost like primer, so detail is easy to see and easy to paint.

HeyGears UltraPrint-Production PAP10 Ash Grey resin bottle

Who is it for?

  • Tabletop & miniature painters – sharp edges and textures that survive priming.
  • Model makers and prop studios – multi-part kits still fit together months later.
  • Jewellery and product designers – excellent master patterns for silicone moulds.
  • Small-batch production – repeatable results plate after plate.

Why people choose it

  • Exceptional detail – pillars down to 0.15 mm in Ash Grey.
  • Stable structure – size deviation within ±0.05 mm.
  • No deformation after 3 years of indoor display.
  • High tensile strength and modulus, so thin parts do not feel brittle.
  • Ash Grey is easy to photograph, inspect and paint.

Miniatures printed in PAP10 resin on a HeyGears Reflex printer

Which printers can use it?

UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro. The Pulsing Release Module is optional — not required, but helpful on tall or delicate plates.

Good to know before you print

  • Shake the bottle well before pouring; pigment settles.
  • Wash in IPA, then cure. Short, even cure times keep fine detail from going chalky.
  • Store closed, away from sunlight, at room temperature.
  • Wear nitrile gloves and work in a ventilated space while the resin is liquid.

See it in action

Genuine HeyGears material. Sold by Print My Design — authorised dealer, ships from Bangkok.

FAQ

Common questions

Which HeyGears printers can I use it with?

It is officially supported on UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro. The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.

What is PAP10 best at?

Very fine detail on small parts: 28 mm tabletop miniatures, scale models, jewellery masters and appearance prototypes. In Ash Grey it prints pillars down to 0.15 mm and holds size deviation within ±0.05 mm, with no deformation after 3 years of indoor display.

Ash Grey or Black — which should I choose?

Ash Grey is a neutral matte tone, almost like primer, so detail is easy to inspect and easy to paint. Black gives even sharper edges and prints pillars down to 0.1 mm, which photographs beautifully. Pick Ash Grey if you paint your models, Black if you show raw prints.

How do I wash and cure it?

Wash in 95% IPA — about 2 minutes rough wash plus 1 minute fine wash in an UltraCraft Wash at 180 r/min — then dry-cure for roughly 30 minutes in an UltraCraft Cure. Short, even curing keeps fine detail from going chalky.

How should I store it, and is it safe to handle?

Keep the bottle closed, upright, dark and dry at room temperature, and shake it well before every pour because the pigment settles. Unopened bottles keep for about 12 months from the production date on the label. Liquid resin irritates skin, so wear nitrile gloves and eye protection and work in a ventilated space. Fully cured parts are safe to handle.