Print My Design
SHOP›CONSUMABLES›HEYGEARS›HEYGEARS ULTRAPRINT MODELING WHITE 1KG (PAS10)
HeyGears HeyGears UltraPrint Modeling White 1kg (PAS10)
HeyGears logo
HEYGEARS · Authorized dealer

HeyGears UltraPrint Modeling White 1kg (PAS10)

Standard matte resin · White · 1 kg · <0.05 mm · fits every UltraCraft Reflex

฿ 1,819incl. VAT
/ rolls
Temporarily out — notify when available
Total · 1 rolls฿1,819
1
🏬 Availability
Online warehouse · ships nationwideOut of stock
True Digital ParkOut of stock
Seacon BangkaeOut of stock
Central SrirachaOut of stock

HeyGears UltraPrint-Modeling PAS10 — White, 1 kg

PAS10 White is the standard modelling resin in its most useful colour. The finish is fully matte with no layer lines visible to the naked eye, tolerance stays under 0.05 mm, and white is simply the easiest colour to work on — primer grips it, paint sits true, and every sculpted detail reads clearly under a desk lamp.

HeyGears UltraPrint-Modeling PAS10 white standard resin bottle

Who is it for?

  • Painters – white is the friendliest base coat you can print.
  • Figurines, busts and miniatures – details read clearly before you prime.
  • Consumer electronics and product mock-ups – clean neutral shapes for review meetings.
  • Silicone mould masters – matte white releases and photographs well.

Why people choose it

  • Fully matte finish – no visible layer lines to the naked eye.
  • Printing tolerance under 0.05 mm.
  • Smallest unsupported angle 25° – fewer supports to clean up.
  • Impact resistant – not easily deformed or broken.
  • Medium viscosity, easy to pour and easy to drain.

PAS10 standard modelling resin range from HeyGears

Which printers can use it?

UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.

Good to know before you print

  • Shake the bottle well before pouring; pigment settles.
  • Wash in 95% IPA, then UV-cure. Short, even cure times keep fine detail from going chalky.
  • Store closed, upright, dark and dry at room temperature.
  • Wear nitrile gloves and work in a ventilated space while the resin is liquid.

See it in action

Genuine HeyGears material. Sold by Print My Design — authorised dealer, ships from Bangkok.

FAQ

Common questions

Which HeyGears printers can I use it with?

It is officially supported on UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro. The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.

Should I choose white or black PAS10?

White is the painter’s choice: primer and paint behave predictably on it and detail is easy to see before you start. Black is the photographer’s choice: matte black shows sculpted edges beautifully with no paint at all. The resin itself is identical apart from pigment.

Anything I should watch out for?

PAS10 does not support the automatic resin refilling feature, so top the tank up by hand. And because the surface is matte rather than glossy, lay down a light primer coat first if you are aiming for a high-gloss painted finish.

How do I wash and cure it?

Wash in 95% IPA — about 2 minutes rough wash plus 1 minute fine wash in an UltraCraft Wash at 180 r/min — then dry-cure for roughly 30 minutes in an UltraCraft Cure. Short, even curing keeps fine detail from going chalky.

How should I store it, and is it safe to handle?

Keep the bottle closed, upright, dark and dry at room temperature, and shake it well before every pour because the pigment settles. Unopened bottles keep for about 12 months from the production date on the label. Liquid resin irritates skin, so wear nitrile gloves and eye protection and work in a ventilated space. Fully cured parts are safe to handle.