Rapid prototyping resin · Pale Purple · 1 kg · matte, sharp detail · Reflex RS / Turbo
PARP10 Pale Purple is the rapid prototyping resin in its original shade. It is built for the design loop rather than the finished product: matte surface that hides layer lines, well-defined details, high dimensional accuracy and enough toughness to survive being passed around a table.
UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.
Genuine HeyGears material. Sold by Print My Design — Thai warranty, ships from Bangkok.
It is officially supported on UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo. The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.
Same family, two shades and two compatibility lists. Pale Purple runs on Reflex RS, RS Turbo, Reflex and Reflex Turbo. Orange Clay adds Reflex 2 and Reflex 2 Pro and is the one HeyGears quotes 0.1 mm minimum detail and 3,350 J/m² work of fracture for. If you own a Reflex 2, choose Orange Clay.
Prototypes rather than finished goods. The matte finish hides layer lines, details come out well defined and dimensional accuracy is high, so it suits jewellery and product prototypes, mould masters and figurines that you want to evaluate physically before committing.
Wash in 95% IPA — about 2 minutes rough wash plus 1 minute fine wash in an UltraCraft Wash at 180 r/min — then dry-cure for roughly 30 minutes in an UltraCraft Cure. Short, even curing keeps fine detail from going chalky.
Keep the bottle closed, upright, dark and dry at room temperature, and shake it well before every pour because the pigment settles. Unopened bottles keep for about 12 months from the production date on the label. Liquid resin irritates skin, so wear nitrile gloves and eye protection and work in a ventilated space. Fully cured parts are safe to handle.
Resin is a light-sensitive liquid that an LCD/MSLA or SLA printer cures layer by layer with 405 nm light. It gives far finer detail and smoother surfaces than filament, which is why it is the standard for figures, jewellery and dental work.
Standard resin suits models and figures; ABS-like resin is tougher for functional parts; water-washable resin is the convenient choice at home; flexible, high-temperature, castable and dental lines are specialist materials chosen per job.
Use a resin printer whose screen size and resolution match the part — ELEGOO Mars and Saturn series for general work, Formlabs or HeyGears professional machines for dental and engineering parts. Take exposure settings from the printer's profile for the resin brand.
Wear nitrile gloves and work with ventilation. Wash parts in IPA or water as the resin type requires, then cure fully under UV. Store resin in its opaque bottle away from sunlight and heat.
