Print My Design
SHOP›CONSUMABLES›HEYGEARS›HEYGEARS ULTRAPRINT MODELING PALE PURPLE 1KG (PAS10)
HeyGears HeyGears UltraPrint Modeling Pale Purple 1kg (PAS10)
HeyGears logo
HEYGEARS · Authorized dealer

HeyGears UltraPrint Modeling Pale Purple 1kg (PAS10)

Standard matte resin · Pale Purple · 1 kg · <0.05 mm · fits every UltraCraft Reflex

฿ 1,819incl. VAT
/ rolls
Temporarily out — notify when available
Total · 1 rolls฿1,819
1
🏬 Availability
Online warehouse · ships nationwideOut of stock
True Digital ParkOut of stock
Seacon BangkaeOut of stock
Central SrirachaOut of stock

HeyGears UltraPrint-Modeling PAS10 — Pale Purple, 1 kg

PAS10 Pale Purple is the original shade of HeyGears’ standard modelling resin. Medium viscosity, moderate strength and toughness, tolerance under 0.05 mm and a fully matte finish with no layer lines visible to the naked eye. The soft lilac tone is easy on the eyes during long sculpting reviews and takes primer without fuss.

HeyGears UltraPrint-Modeling PAS10 Pale Purple standard resin bottle

Who is it for?

  • Rapid prototyping – the everyday choice for a good print, fast.
  • Figurines and miniatures – matte finish shows sculpt clearly.
  • Consumer electronics mock-ups with clean, neutral surfaces.
  • Small batch production – the tolerance holds across repeat runs.

Why people choose it

  • Fully matte finish – no visible layer lines.
  • Printing tolerance under 0.05 mm.
  • Smallest unsupported angle 25° – fewer supports to remove.
  • Impact resistant – not easily deformed or broken.
  • Medium viscosity, easy to pour and drain.

PAS10 standard modelling resin range from HeyGears

Which printers can use it?

UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.

Good to know before you print

  • Shake the bottle well before pouring; pigment settles.
  • Wash in 95% IPA, then UV-cure. Short, even cure times keep fine detail from going chalky.
  • Store closed, upright, dark and dry at room temperature.
  • Wear nitrile gloves and work in a ventilated space while the resin is liquid.

See it in action

Genuine HeyGears material. Sold by Print My Design — authorised dealer, ships from Bangkok.

FAQ

Common questions

Which HeyGears printers can I use it with?

It is officially supported on UltraCraft Reflex RS, Reflex RS Turbo, Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro. The Pulsing Release Module is optional — not required, but it helps with tall or delicate plates.

Which PAS10 colour should I choose?

All three behave identically — only the pigment changes. Pale Purple is the original and is easy on the eyes for long sculpting sessions. White is the friendliest base for painting. Black shows sculpted edges best in photographs with no paint at all.

Anything I should watch out for?

PAS10 does not support the automatic resin refilling feature, so top the tank up by hand. And because the finish is matte rather than glossy, lay down a light primer coat first if you want a high-gloss painted result.

How do I wash and cure it?

Wash in 95% IPA — about 2 minutes rough wash plus 1 minute fine wash in an UltraCraft Wash at 180 r/min — then dry-cure for roughly 30 minutes in an UltraCraft Cure. Short, even curing keeps fine detail from going chalky.

How should I store it, and is it safe to handle?

Keep the bottle closed, upright, dark and dry at room temperature, and shake it well before every pour because the pigment settles. Unopened bottles keep for about 12 months from the production date on the label. Liquid resin irritates skin, so wear nitrile gloves and eye protection and work in a ventilated space. Fully cured parts are safe to handle.